High-efficiency perovskite tandem solar cells using cross-linked layers
Home » Smart home » Solar Energy » High-efficiency perovskite tandem solar cells using cross-linked layers

High-efficiency perovskite tandem solar cells using cross-linked layers

posted in: Solar Energy 0

The power conversion efficiency (PCE) of single-junction perovskite solar cells (PSCs) has increased remarkably from 3.8% to 25.2% in just a decade. As the rapid development of PCE has been approaching the limit of its theoretical efficiency, fabricating tandem solar cells by combining subcells with different bandgaps offers an avenue to go beyond the Shockley-Queisser limits of single-junction solar cells.

The tandem devices utilize different parts of the solar spectra using subcells with different bandgaps to reduce the thermal loss of photo-generated carriers. Due to the tunable bandgap, high absorption coefficient and low fabrication cost, metal halide perovskites are promising candidates for tandem devices.

However, the efficiency of perovskite-based tandem solar cells is largely limited by wide-bandgap top-cells which typically possess a large open-circuit voltage (VOC) loss. The severe nonradiative charge recombination at the interface between perovskite and hole transport layer (HTL) is a key factor leading to the large VOC loss.

Recently, research group of Prof. Hairen Tan from Nanjing University has used the cross-linked organic small molecule VNPB as the HTL for wide-bandgap perovskite solar cells. A VOC increase of nearly 50 mV was successfully obtained for wide-bandgap solar cells with bandgaps of 1.6 eV, 1.7 eV and 1.8 eV.

Compared with the control device using PTAA polymeric HTL, the perovskite films deposited on VNPB have larger grain size and better crystallinity. VNPB enables faster charge extraction and reduces defect density at the HTL/perovskite interface.

Density functional theory (DFT) calculation shows that the closer contact between VNPB and perovskite increases the defect formation energy and decreases the defect density, thus effectively reducing the non-radiative recombination of carriers. Finally, the PCEs of perovskite/perovskite and perovskite/silicon tandem solar cells using VNPB as HTL reach 24.9% and 25.4%, respectively.

This work shows that cross-linkable small molecules are promising for high-efficiency and cost-effective perovskite tandem photovoltaic devices.

Research Report: “Cross-linked hole transport layers for high efficiency perovskite tandem solar cells”

Related Links

Nanjing University

All About Solar Energy at SolarDaily.com

Thanks for being here;

We need your help. The SpaceDaily news network continues to grow but revenues have never been harder to maintain.With the rise of Ad Blockers, and Facebook – our traditional revenue sources via quality network advertising continues to decline. And unlike so many other news sites, we don’t have a paywall – with those annoying usernames and passwords.

Our news coverage takes time and effort to publish 365 days a year.

If you find our news sites informative and useful then please consider becoming a regular supporter or for now make a one off contribution.

SpaceDaily Contributor

$5 Billed Once
credit card or paypal

SpaceDaily Monthly Supporter
$5 Billed Monthly

paypal only

Sandia uncovers hidden factors that affect solar farms during severe weather

Albuquerque NM (SPX) Sep 01, 2021

Sandia National Laboratories researchers combined large sets of real-world solar data and advanced machine learning to study the impacts of severe weather on U.S. solar farms, and sort out what factors affect energy generation. Their results were published earlier this month in the scientific journal Applied Energy.

Hurricanes, blizzards, hailstorms and wildfires all pose risks to solar farms both directly in the form of costly damage and indirectly in the form of blocked sunlight and reduced elec … read more

Source link

Leave a Reply