Solar Energy

Holograms increase solar energy yield

Published

4 years ago

June 5, 2021

sarosh

The energy available from sunlight is 10,000 times more than what is needed to supply the world’s energy demands. Sunlight has two main properties that are useful in the design of renewable energy systems. The first is the amount power falling on a fixed area, like the ground or a person’s roof. This quantity varies with the time of day and the season. The second property is the colors or spectrum of the sunlight.

One way to capture solar energy is to use solar cells that directly turn sunlight into electricity. In a solar module like those that people place on their roof, many cells are assembled on a rigid panel, connected to one another, sealed, and covered with protective glass.

The solar cell works best when certain colors of sunlight fall on it, and when the whole area is covered by photocells. However, some panel area is needed to connect the cells, and the solar cell shape may not allow all of the remaining panel area to collect sunlight. These effects make the solar panel less efficient than it could be. Capturing as much of the sunlight on a solar panel as possible is critical to efficiently harnessing solar energy.

Researchers at the University of Arizona recently developed an innovative technique to capture the unused solar energy that illuminates a solar panel. As reported in the Journal of Photonics for Energy (JPE), they created special holograms that can be easily inserted into the solar panel package.

Each hologram separates the colors of sunlight and directs them to the solar cells within the solar panel. This method can increase the amount of solar energy converted by the solar panel over the course of a year by about 5 percent. This will reduce both the cost and the number of solar panels needed to power a home, a city, or a country.

The research was supported by the QESST Engineering Research Center, which is sponsored by the US National Science Foundation and US Department of Energy to address the challenge of transforming electricity generation to sustainably meet growing demands for energy.

Low cost, sustainable design

Designed by PhD student Jianbo Zhao, under the supervision of Raymond K. Kostuk, professor of electrical and computer engineering and optical sciences, and in collaboration with fellow PhD student Benjamin Chrysler, the holographic light collector combines a low-cost holographic optical element with a diffuser. The optical element is situated symmetrically at the center of the photovoltaic module to obtain the maximum effective light collection.

The team computed the annual energy yield improvement for Tucson, Arizona, and presented a reproducible method for evaluating the power collection efficiency of the holographic light collector as a function of the sun angles at different times of day, in different seasons, and at different geographical locations.

According to JPE Editor-in-Chief Sean Shaheen at University of Colorado Boulder, the collector and associated method are especially noteworthy because they are low-cost and scalable as well as impactful: “The enhancement of approximately five percent in annual yield of solar energy enabled by this technique could have large impact when scaled to even a small fraction of the 100s of gigawatts of photovoltaics being installed globally.

Professor Kostuk’s team has demonstrated their holographic approach with a low-cost material based on gelatin, which is readily manufactured in large quantity. And while gelatin is normally derived from animal collagen, progress in lab-derived versions has made it likely that synthetic alternatives could be used at scale.”

Research Report: “Holographic low concentration optical system increasing light collection efficiency of regular solar panels”

Source link

Solar Energy

Star Catcher showcases space energy beaming tech at Jacksonville stadium

Published

16 hours ago

March 24, 2025

sarosh

Star Catcher showcases space energy beaming tech at Jacksonville stadium

by Clarence Oxford

Los Angeles CA (SPX) Mar 24, 2025

Star Catcher Industries, Inc. (“Star Catcher”), a leader in the field of space-to-space energy transfer, has completed its first public demonstration of space power beaming technology. This milestone event, held at EverBank Stadium in Jacksonville, Florida, marks significant progress toward the development of a space-based energy grid designed to provide uninterrupted power to satellites and space infrastructure.

During the demonstration, Star Catcher deployed its proprietary system to harness concentrated solar energy and beam it over a distance exceeding 100 meters. The energy was transmitted to a series of standard satellite solar panels, effectively showcasing the system’s compatibility with existing spacecraft hardware. This demonstration highlighted the adaptability of Star Catcher’s technology, which requires no modifications to current satellite power systems, allowing seamless integration into existing orbital platforms.

“This demonstration marks the first end-to-end test of our space power beaming technology, proving we can collect and wirelessly transmit energy with the precision needed for space applications,” said Andrew Rush, Co-Founder and CEO of Star Catcher. “Today’s success puts us one step closer to eliminating power constraints in space and unlocking new capabilities for satellites and the customers they serve.”

The EverBank Stadium event represents a foundational achievement for the planned Star Catcher Network, an orbital power infrastructure intended to offer on-demand, continuous energy supply to satellites and other space-based assets. By validating the core functionality of its power transmission technology in a real-world setting, Star Catcher has demonstrated its readiness to move toward larger-scale applications.

Looking ahead, the company is preparing for a more ambitious trial at Space Florida’s Launch and Landing Facility (LLF) this summer. This future demonstration aims to transmit hundreds of watts of power wirelessly across a distance greater than one kilometer, energizing multiple simulated satellites simultaneously. The LLF site, historically used for Space Shuttle landings, will provide a fitting backdrop for this next phase of development.

Star Catcher’s momentum in advancing space power solutions is further bolstered by recent financial and governmental support. The firm secured a $12.25 million seed investment co-led by Initialized Capital and B Capital. In addition, it received an AFWERX SBIR Phase 1 contract to enhance its capabilities in space-based power transmission.

Rooted in Jacksonville, Star Catcher has deep ties to the local space innovation ecosystem. By hosting its inaugural technology demonstration at EverBank Stadium, in partnership with the Jacksonville Jaguars, the company reinforced its commitment to community involvement. The event also served as a unique educational platform, allowing local students to engage with groundbreaking space technology developed within their region.

Source link

Solar Energy

Framatome and Perpetual Atomics to Scale Up Space Battery Production for Future Missions

Published

16 hours ago

March 24, 2025

sarosh

Framatome and Perpetual Atomics to Scale Up Space Battery Production for Future Missions

by Sophie Jenkins

London, UK (SPX) Mar 24, 2025

Framatome and Perpetual Atomics have formalised a new strategic partnership through a Memorandum of Understanding (MoU), aiming to scale up the production of americium-based radioisotope power systems, often referred to as “space batteries.” Signed during the Farnborough International Space Show, the agreement outlines a joint effort to advance the industrial processing of americium into sealed sources for radioisotope heater units (RHUs) and radioisotope thermoelectric generators (RTGs).

These power systems, which generate heat through the natural decay of radioisotopes, can use that heat directly or convert it into electrical energy. Among available isotopes, americium-241 stands out due to its lengthy half-life of approximately 430 years, making it an optimal choice for space missions requiring sustained energy over extended durations.

The collaboration is designed to address the need for reliable energy solutions for deep space exploration, with a focus on industrialising the manufacturing processes to meet the demands of upcoming missions.

“We are delighted to collaborate with Perpetual Atomics to jointly pioneer the further development of nuclear power technology, pushing new frontiers in enabling deep space exploration. The partnership forges Perpetual Atomics’ cutting-edge technology in radioisotope nuclear power systems with Framatome’s global nuclear pedigree in production-scale industrialisation,” said Dr. Kason Bala, Chief Commercial Officer, UK Defence and Space at Framatome Ltd.

Professor Richard Ambrosi, Chief Scientific Officer, founder, and Director of Perpetual Atomics, commented: “The UK and Europe host a large inventory of americium, and this combined with the technology maturity, know-how, and industrial capability to scale production and manufacturing establishes an important foundation for the UK and European Space Agency (ESA) programmes. Perpetual Atomics looks forward to working closely with Framatome to develop industrialisation solutions for radioisotope power systems at scale.”

The agreement leverages Framatome’s extensive experience in nuclear manufacturing and regulatory compliance and Perpetual Atomics’ two decades of innovation in the field, much of which has been driven by the Space Nuclear Power group at the University of Leicester. Framatome Space and Framatome Ltd are expected to play significant roles in supporting lunar and Mars exploration missions under UK and ESA initiatives later this decade.

Source link

Solar Energy

800-mn-euro battery factory to be built in Finland

Published

4 days ago

March 21, 2025

sarosh

800-mn-euro battery factory to be built in Finland

by AFP Staff Writers

Helsinki (AFP) Mar 20, 2025

A Chinese-Finnish company announced Thursday it would begin building a battery materials plant in Finland in April, the first of its kind in the Nordic country.

The plant will produce cathode active material, a key component in lithium-ion batteries used in electric vehicles and for energy storage, said Easpring Finland New Materials, a company co-owned by Finnish Minerals Group and Beijing Easpring Material Technology.

It said the investment was worth 800 million euros ($868 million).

The announcement came one week after a bankruptcy filing by Swedish battery maker Northvolt, which had planned to develop cathode production but dropped those plans to focus on battery cell production as it fought for survival.

Easpring Finland New Materials said commercial production was expected to begin in 2027.

The plant, to be located in Kotka in southeast Finland, will initially produce 60,000 tonnes of cathode active material annually.

At full production capacity, it could supply cathode material for the production of around 750,000 electric vehicles annually, the company said.

Matti Hietanen, the chief executive of Finnish Minerals Group, said the investment created an “entirely new kind of industry in Finland related to the production of lithium-ion batteries” and represented a European “spearhead project for the industry.”

The new plant will employ 270 people and an area of around 80 hectares had been reserved for its construction.

Source link