TOP SCEINCE
Artificial ‘power plants’ harness energy from wind and rain
Fake plants are moving into the 21st century! Researchers developed literal “power plants” — tiny, leaf-shaped generators that create electricity from a blowing breeze or falling raindrops — and described them in ACS Sustainable Chemistry & Engineering. The team tested the energy harvesters by incorporating them into artificial plants.
The team built two different types of energy collectors: a triboelectric nanogenerator (TENG) to capture kinetic energy from the wind and a droplet-based energy generator (DEG) to collect energy from falling raindrops. The TENG consisted of a layer of nylon nanofibers sandwiched between layers of polytetrafluoroethylene, more commonly known as Teflon™, and copper electrodes. When the layers pressed into each other, static charges were generated and converted into electricity. Teflon was also used to make the DEG, which was waterproofed and covered with a conductive fabric to act as the electrodes. As raindrops hit one of the electrodes, it caused an imbalance in charges, generating a small current and high voltage. Under optimal conditions, the TENG produced 252 volts of power and the DEG 113 volts, but only for short periods of time.
The team mounted the DEG atop the TENG and incorporated leaf-shaped versions into an artificial plant. When the leaf-shaped generators were exposed to conditions mimicking natural wind and rain, they powered 10 LED lights in short flickers. This proof-of-concept “power plant” device could be further developed into larger systems or networks of power plants to produce clean energy from natural sources, the researchers say.