Connect with us

Camera

Blackmagic Design announces Pyxis modular full-frame video camera

Published

on

Blackmagic Design announces Pyxis modular full-frame video camera



Alongside the Ursa Cine, Blackmagic Designs also announced the Pyxis, a $3000, 6K full-frame (36 x 24mm) modular camera. It will be available with PL, locking Canon EF or Leica L mounts.

As with most of Blackmagic’s cameras, the Pyxis offers a series of aspect ratios and crops in different frame rates, extending from 6048 x 4032 pixel 3:2 open gate at up to 36p, to 17:9 DCI 4K at up to 60p taken from a Super35 (∼APS-C) region of the sensor. Unlike the Ursa Cine models, the Pyxis appears to use a conventional Bayer color filter pattern.

The Pyxis captures to CFexpress cards or outputs over USB-C to an external SSD or over Ethernet. It uses Blackmagic’s proprietary demosaiced and compressed ‘Blackmagic RAW’ format and can generate H.264 proxy files alongside. It has a built-in 4″ Full HD LCD panel that can act as an HDR display thanks to its 1500 nits peak brightness. Despite being described as a box camera, the Pyxis includes extensive direct controls, as well as this display.

The camera features a series of mounting points for handles, viewfinders and other accessories and has a replaceable side plate that can be swapped-out for one with a SSD/phone holder or a standard rosette connector.

The sensor is a dual conversion gain design that Blackmagic indicates as offering native ISO or 400 and 3200, with these two states used to provide all higher and lower ISO values (rather than using variable amplification as is usually done in stills cameras). Blackmagic claims 13 stops of DR.

The presence of dual conversion gain, its 36p open gate max frame rate and the need for substantial crops to achieve 60p (a very narrow 2.4:1 6048 x 2520px mode being the highest resolution at which it can be delivered) may point to the use of the 24MP Sony Semiconductor sensor that appears in a wide array of other cameras, From Panasonic’s S1H to Sigma’s fp and Nikon’s Zf. If this is the case, then there’ll be appreciably worse rolling shutter than the likes of Sony’s (much more expensive) FX6, but with the advantage of higher resolution capture and the greater format flexibility that comes with this.

The Blackmagic Pyxis is available from June 2024 at a recommended price of $3,000.

Blackmagic Design Announces New Blackmagic PYXIS 6K

NAB 2024, Las Vegas, USA – Friday, April 12, 2024 – Blackmagic Design today announced Blackmagic PYXIS 6K a next generation digital film camera that features a versatile box or cube design so you can rig up the perfect camera for your production! This new model features a massive 36 x 24mm 6K sensor with 13 stops of dynamic range and dual CFexpress media recorders, all in a customizable body. Blackmagic PYXIS 6K is available in three models, with customers able to choose between L-Mount, PL or Locking EF lens mounts. Blackmagic PYXIS 6K will be available in June from Blackmagic Design resellers worldwide from US$2,995.

The Blackmagic PYXIS 6K will be demonstrated on the Blackmagic Design NAB 2024 booth #SL5005.

With multiple mounting points and accessory side plates, it’s easy to configure Blackmagic PYXIS into the camera customers need it to be. PYXIS’ compact body is made from precision CNC machined aerospace aluminum, which means it is lightweight yet very strong. Customers can easily mount it on a range of camera rigs such as cranes, gimbals or drones. In addition to the multiple 1/4″ and 3/8″ thread mounts on the top and bottom of the body, Blackmagic PYXIS has a range of side plates that further extend their ability to mount accessories such as handles, microphones or even SSDs. All this means customers can build the perfect camera for the any production that’s both rugged and reliable.

Blackmagic PYXIS features a massive full frame sensor with a native resolution of 6048 x 4032. That’s almost three times larger than a Super 35 sensor and allows customers to shoot with a shallow depth of field or to use anamorphic lenses uncropped for a true cinematic look. Whether users are shooting in bright sunlight or in almost no light at all, the 13 stops of dynamic range with dual native ISO up to 25,600 provide stunning low noise images in all lighting conditions.

Using the full area of the sensor gives customers a unique open gate 3:2 image which also lets customers reframe their shots in post production. The large sensor also lets customers work in true 6:5 anamorphic without cropping, making widescreen cinematic images more detailed and in higher resolution than previously possible.

With 3 models, customers can choose between L-Mount, EF or PL lenses, making Blackmagic PYXIS compatible with the largest range of cinema and photographic lenses in the world. The L-Mount model works with the latest full frame lenses from Leica, Panasonic and Sigma but can also accommodate lens adapters, allowing customers to use a wide variety of new and vintage lenses. The EF model lets customers use high quality photographic lenses customers already own from DSLRs or even Blackmagic Pocket Cinema Cameras. Or the PL model lets customers work with professional cinema lenses from Zeiss, ARRI, Cooke and more without needing an adapter.

Blackmagic PYXIS can shoot in all standard resolutions and frame rates from HD up to DCI 4K and even 6K. Customers can even shoot stills at 24.6 megapixels. Blackmagic PYXIS will shoot up to 36 fps at 6048 x 4032 3:2 open gate or 60 fps at 6048 x 2520 2.4:1 and 60 fps at 4096 x 2160 4K DCI. For higher frame rates customers can window the sensor and shoot up to 100 fps at 2112 x 1184 Super 16.

The built in LCD on Blackmagic PYXIS is more than just a simple status display. It’s a 4″ high resolution HDR touchscreen that is also perfect for monitoring and reviewing shots on set. Its full HD resolution means customers can frame and focus their shots without needing to carry around a bulky external monitor. Customers can even use the display as a focus assist station.

Blackmagic PYXIS features a logical design that puts important functions such as ISO, WB and shutter at their fingertips with both touchscreen and physical controls. A row of 3 customizable function buttons means customers don’t have to go hunting through menus on a tiny screen to find a command. The controls can even be locked to avoid accidentally changing settings during a shot or when the camera is out of reach on a rig.

The innovative side plates expand the riggability of their camera even further. The standard plate included with Blackmagic PYXIS is made from the same aircraft grade aluminum as the camera body and features 2 1/4″ thread mounts and one 3/8″ thread mount, allowing customers to add microphones, brackets or other accessories. Or customers can attach the included SSD plate which offers a convenient location to securely attach a USB-C drive for recording or even a mobile phone for live streaming.

Blackmagic PYXIS records in Blackmagic RAW to preserve control of detail, exposure and color during post production. It also records HD H.264 proxies in real time making it easy to share media around the world in minutes. This means images always maintain unprecedented resolution and quality for color, keying, compositing, reframing, stabilization and tracking in HD, 4K or 6K.

The Blackmagic PYXIS features two built in CFexpress card recorders, and a USB-C expansion port for recording direct to external flash media disks or an SSD. CFexpress media are more durable and faster than even older media so are perfect for recording full resolution, 12-bit Blackmagic RAW files. Plus, with dual CFexpress slots, customers can keep recording because customers can hot swap full cards without stopping.

Blackmagic PYXIS supports creating a small H.264 proxy file in addition to the camera original media when recording. This means the small proxy file can upload to Blackmagic Cloud in seconds so their media is available back at the studio in real time. The ability to transfer media directly into the DaVinci Resolve media bin as editors are working is revolutionary and has never before been possible. Any editor working anywhere in the world will get the shots.

When uploading to Blackmagic Cloud, customers can use an Apple or Android phone to get a connection to the internet via mobile data. Simply connect the phone to the USB-C port and Blackmagic PYXIS will configure for mobile data. Customers can also connect via wired Ethernet using the camera’s Ethernet port. This lets customers get their media out as customers shoot so post production teams anywhere in the world can start work in real time.

Blackmagic PYXIS supports the optional Blackmagic URSA Cine EVF to make outdoors and handheld shooting accurate and easy. Customers get an integrated high quality 1920 x 1080 color OLED display with built in proximity sensor, 4 element glass diopter for incredible accuracy with a wide focus adjustment.

Blackmagic PYXIS features a wide range of connections for audio, monitoring, power and more. The camera includes a 12G-SDI out for monitoring with support for HDR and Ultra HD output. That means customers can connect an SDI display for on set monitoring of images, with or without overlays that show critical information and camera status. SDI allows for much longer cable runs than HDMI making it easier to reach monitors that are further away on set.

Blackmagic PYXIS features a built hardware streaming engine that supports RTMP and SRT streaming to YouTube, Facebook, X and more. For internet access, customers have two options, one to connect via Ethernet or customers can connect a 4G or 5G phone for mobile data. As the streaming is built into the camera, customers can see the stream status and data rate in the viewfinder and the LCD.

“Since the introduction of the original Pocket Cinema Cameras, our customers have been asking us to make it in a more customizable design,” said Grant Petty, Blackmagic Design CEO. “But we wanted it to be so much more than just a Pocket Cinema Camera in a different body. The new Blackmagic PYXIS is a fully professional cinema camera with more connections and seamless integration into post production workflows. We think customers are going to love the incredibly adaptable design and we can’t wait to see how they use it!”

Blackmagic PYXIS 6K Features

  • 36 x 24mm full frame 6K 6048 x 4032 sensor.
  • Open gate 3:2, full height 6:5 anamorphic and Super 35 for creating cinematic content.
  • Choice of models with L-Mount, PL or locking EF lens mounts.
  • Records full resolution up to 36 fps or 120 fps windowed.
  • Built-in 4″ HDR 1500 nit LCD screen.
  • Records Blackmagic RAW and H.264 proxies.
  • Extremely fast dual CFexpress card recording.
  • Ethernet or mobile data for mobile remote streaming.
  • Optional Blackmagic URSA Cine EVF.
  • Features 12G-SDI for monitoring with status overlay.
  • Professional mini XLR input with 48 volt phantom power.
  • Complete streaming solution for YouTube, Facebook, Twitter and more.
  • High capacity BP-U series batteries.

Availability and Price

Blackmagic PYXIS 6K will be available in June from US$2,995, excluding duties, from Blackmagic Design resellers worldwide.



Source link

Continue Reading
Click to comment

Leave a Reply

Camera

A nature photography tour of Madagascar, Part 3: Kirindy Forest

Published

on

By

A nature photography tour of Madagascar, Part 3: Kirindy Forest


In the last two articles in this series, I wrote about my visits to Andasibe National Park, where I photographed lemurs and chameleons, and Tsingy Rouge National Park, where I saw beautiful erosion-formed formations. This time, I’d like to write about my visit to Kirindy Forest.

A Verreaux’s Sifaka, my favorite lemur species in Kirindy, feeding in a tree. The eyes on some of these lemur species are incredible.

Canon EOS 5D Mark IV, Sigma 150-600mm F5-6.3
150mm, 1/1000 sec, F6.3, ISO 800

Kirindy Forest (or Kirindy Private Reserve) is a private nature reserve located in the west of Madagascar. The forest is home to a wide variety of animals, from many species of lemurs to fossas (a very weird-looking predator) to geckos and chameleons. Numerous species of plants and trees are also found in the region, the most famous and iconic of which is the baobab tree.

Baobab trees under post-sunset glow. The gaps between the trees made it easier to compose without creating overlap.

Canon EOS 5D Mark IV, Canon 70-300mm F4-5.6
83mm, 13 sec, F11, ISO 200

From a photographic point of view, Kirindy is nothing less than a paradise and was one of my favorite locations on my month-long Madagascar trip. The wildlife is surprisingly easy to find and photograph (with many highly skilled and cheerful guides available on the premises), the baobabs are easy to get to, and there are comfortable accommodation options close by. The only bad thing is the Wi-Fi connection.

Lemurs are one family of primates Kirindy has no shortage of. There are no less than eight lemur species here, from the tiny Madame Berthe’s Mouse Lemur (the smallest primate in the world, weighing 30 grams) to red-fronted lemurs, sportive lemurs and sifakas. I photographed all of Kirindy’s diurnal species in three days, which shows how easy they are to find with a good guide. As to being easy to photograph, that’s a different story.

Red-fronted lemur

Canon EOS 5D Mark IV, Sigma 150-600mm F5-6.3
347mm, 1/125 sec, F5.6, ISO 400

The easiest species to find in Kirindy is the red-fronted lemur. They are small and relatively common, so one could say they’re also the least exciting of the local lemur species, but I found them to be very cute and expressive subjects.

Unfortunately due to massive deforestation and climate change, Madagascar’s lemurs are losing their ability to migrate and access water. Authorities are trying to help them by giving them water. The red-fronted lemurs are, therefore, much less averse to getting close to humans. I really hope this doesn’t hurt them in the long run.

A red-fronted lemur is feeding in a tree. Its interaction with its environment is what makes this image. These animals are cathemeral, meaning that they are active during the day and at night, especially during the full moon.

Canon EOS 5D Mark IV, Sigma 150-600mm F5-6.3
403mm, 1/250 sec, F6.3, ISO 800

The interestingly named sportive lemurs appear not to be sportive at all. Most of the time, they rest in the trees to digest the plants they have eaten. But during the mating season, male sportive lemurs have been observed to box with each other, which gave them their unusual name.

This sportive lemur looked like it had one too many drinks the previous night!

Canon EOS 5D Mark IV, Sigma 150-600mm F5-6.3
516 mm, 1/500 sec, F6.3, ISO 1600

The crown jewel of Kirindy’s wildlife selection (in my opinion) is the Verreaux’s sifaka, a beautiful, medium-sized lemur. Its thick and silky fur is mostly white, other than dark brown patches on the top of the head, face and arms. Like all sifakas, it has a long tail that it uses as a balance when leaping from tree to tree, where they are capable of making remarkable leaps. Distances of 9–10m (30ft) are not uncommon.

A Verreaux’s sifaka lemur, beautifully framed between tree branches. Those eyes are to die for!

Canon EOS 5D Mark IV, , Sigma 150-600mm F5-6.3
531mm, 1/320 sec, F6.3, ISO 800

As a rule, the better composed the jumping shots I got, the worse the sharpness was on them. These guys are notoriously hard to catch when jumping. Here’s an effort, with the sifaka showing its trademark Superman-style jump.

Canon EOS 5D Mark IV, Sigma 150-600mm F5-6.3
150mm, 1/2500 sec, F5.6, ISO 800

Unfortunately, sifakas are very hard to photograph. They tend to stay very high up in the trees, which keeps them both far away and at awkward angles. This forces the photographer to use longer lenses, which becomes surprisingly tiresome when hand-holding the camera. I wanted to shoot at eye level but ended up shooting upward the vast majority of the time. They also just love hopping from tree to tree exactly when a photographer has finally found a good composition.

This sifaka looked like something out of a Dr. Seuss book. Note the shooting angle is less than optimal here, due to the height of the tree it was sitting on.

Canon EOS 5D Mark IV, Sigma 150-600mm F5-6.3
302mm, 1/800 sec, F5.6, ISO 400

As beautiful as they are shy. A lucky eye-level shot.

Canon EOS 5D Mark IV, Sigma 150-600mm F5-6.3
421mm, 1/1000 sec, F6.3, ISO 800

My visit to Madagascar was during baby season for lemurs, which was wonderful. I ended up seeing many species carrying very young and impossibly cute baby lemurs, and the sifakas were no different.

Again, the challenge was the distance and their tendency to move around all the time, probably even more so when carrying babies. Unfortunately, about 30% of infants are lost to predators like the fossa, a cat-like mammal, and a smaller number to raptors such as the Madagascar harrier-hawk.

For the first 6-8 weeks, the infant clings to the mother’s stomach, but for the following 19 weeks, it clings to her back. During my trip, I saw infants up to 8 weeks old. I guess the signature eyes are there from birth!

Canon EOS 5D Mark IV, Sigma 150-600mm F5-6.3
600mm, 1/500 sec, F6.3, ISO 800

A lucky closer-range, eye-level shot of a baby sifaka in its mother’s fur.

Canon EOS 5D Mark IV, Sigma 150-600mm F5-6.3
600mm, 1/125 sec, F6.3, ISO 800

I’m not much of a bird photographer, but several beautiful owl species are in Kirindy, and they were relatively easy to find.

Madagascar scops owl

Canon EOS 5D Mark IV, Sigma 150-600mm F5-6.3
516mm, 1/250 sec, F6.3, ISO 400

White-browed owl

Canon EOS 5D Mark IV, Sigma 150-600mm F5-6.3
283mm, 1/160 sec, F5.6, ISO 400

Finally, the Kirindy area was once home to a huge forest of baobabs. Not many remain, but those that are still there are huge and impressive. It was fun photographing a group of baobabs in the late afternoon and early evening, under direct light and during post-sunset glow.

The more baobabs close together in one location, the harder they are to compose, but if you manage to combine multiple elements into one shot in a satisfying way, then perhaps you’ve achieved something.

Canon EOS 5D Mark IV, Canon 11-24mm
19mm, 1/100 sec, F14, ISO 100

Here, I used the gaps between the foreground trees to frame the background trees.

Canon EOS 5D Mark IV, Canon 70-300mm F4-5.6
84mm, 0.8 sec, F14, ISO 100

I highly recommend visiting Kirindy Forest if you’re interested in Madagascar’s wildlife. The concentration of fascinating species and relaxed atmosphere are unmatched.

In the next article in this series, I will write about my journey from Tsingy De Bemaraha National Park to Isalo.


Erez Marom is a professional nature photographer, photography guide and traveler based in Israel. You can follow Erez’s work on Instagram and Facebook, and subscribe to his mailing list for updates and to his YouTube channel.

If you’d like to experience and shoot some of the world’s most fascinating landscapes with Erez as your guide, take a look at his unique photography workshops in Madagascar, Greenland, the Lofoten Islands, Namibia and Vietnam.

Erez also offers video tutorials discussing his images and explaining how he achieved them.

More in this Series:

Selected Articles by Erez Marom:





Source link

Continue Reading

Camera

DPReview Rewind: the birth of the Canon EOS D30, its first ‘home grown’ DSLR

Published

on

By

DPReview Rewind: the birth of the Canon EOS D30, its first ‘home grown’ DSLR


In the early days of digital, cameras were big, bulky, expensive and mostly out of reach for people unwilling to shell out professional-level MSRPs. Then came the Canon EOS D30, a landmark camera that introduced a slew of film photographers to digital, inspiring photojournalists to give up high-end film cameras and a new generation of wedding photographers, portraits and landscape artists to dip into the DSLR pool.

At $3000, it was not cheap, but it was within reach of a new category of camera buyer, the ‘prosumer.’

During our 25th anniversary year, we’re looking back at some of the milestones in camera history. On this day in history, on May 17, way back in the year 2000, the D30 was announced as Canon’s first built-from-the-ground-up in-house DSLR. Up to this point, Canon’s DSLRs (the EOS D2000 and EOS D6000) were joint ventures with Kodak. These cameras married Kokak internals with Canon bodies.

With the new camera, Canon was doing it all themselves, including designing a new body, its own sensors and processors and the introduction of its own RAW and JPEG engines. It would also become the first DSLR with an APS-C format CMOS sensor, a blistering 3.25MP beast capable of 3 RAW image bursts (or 9 Fine JPEG) and a full day of shooting on a single charge. It was pretty cutting-edge for the time.

The camera would arrive on store shelves in time for the holidays. In our review, dated Oct 10, 2000, we noted the monumental task that Canon had taken on. They had not only taken on building a camera on their own and decided to use a relatively new high-resolution CMOS sensor at a time when CMOS struggled with high megapixel builds, but they also had to know consumers would be comparing their camera to the previously announced, although not yet released, Nikon D1.

But Canon had pulled it off, and we were impressed, writing: “Canon’s engineers, designers and developers haven’t let them down, the D30 WILL go down in history books as a very important camera, breaking a price barrier and opening up the digital SLR market (more so than Fujifilm’s S1 Pro) to a new wave of users, both new and old. From the minute you pick up the D30 … you get a feeling of quality you weren’t expecting.”

Revisit our Canon EOS D30 review



Source link

Continue Reading

Camera

DPReview Rewind: the birth of the Canon EOS D30, its first ‘home grown’ DSLR

Published

on

By

DPReview Rewind: the birth of the Canon EOS D30, its first ‘home grown’ DSLR


In the early days of digital, cameras were big, bulky, expensive and mostly out of reach for people unwilling to shell out professional-level MSRPs. Then came the Canon EOS D30, a landmark camera that introduced a slew of film photographers to digital, inspiring photojournalists to give up high-end film cameras and a new generation of wedding photographers, portraits and landscape artists to dip into the DSLR pool.

At $3000, it was not cheap, but it was within reach of a new category of camera buyer, the ‘prosumer.’

During our 25th anniversary year, we’re looking back at some of the milestones in camera history. On this day in history, on May 17, way back in the year 2000, the D30 was announced as Canon’s first built-from-the-ground-up in-house DSLR. Up to this point, Canon’s DSLRs (the EOS D2000 and EOS D6000) were joint ventures with Kodak. These cameras married Kodak internals with Canon bodies.

With the new camera, Canon was doing it all themselves, including designing a new body, its own sensors and processors and the introduction of its own RAW and JPEG engines. It would also become the first DSLR with an APS-C format CMOS sensor, a blistering 3.25MP beast capable of 3 Raw image bursts (or 9 Fine JPEG) and a full day of shooting on a single charge. It was pretty cutting-edge for the time.

The camera would arrive on store shelves in time for the holidays. In our review, dated Oct 10, 2000, we noted the monumental task that Canon had taken on. They had not only taken on building a camera on their own and decided to use a relatively new high-resolution CMOS sensor at a time when CMOS struggled with high megapixel builds, but they also had to know consumers would be comparing their camera to the previously announced, although not yet released, Nikon D1.

But Canon had pulled it off, and we were impressed, writing: “Canon’s engineers, designers and developers haven’t let them down, the D30 WILL go down in history books as a very important camera, breaking a price barrier and opening up the digital SLR market (more so than Fujifilm’s S1 Pro) to a new wave of users, both new and old. From the minute you pick up the D30 … you get a feeling of quality you weren’t expecting.”

Revisit our Canon EOS D30 review



Source link

Continue Reading

Trending

Copyright © 2017 Zox News Theme. Theme by MVP Themes, powered by WordPress.