Smart home
ILife A10s Robot Vacuum Mop Review
The company has a small range of cleaning robots priced from Rs. 14,900 onwards, going up to the flagship product in the range, the Rs. 34,900 ILife A10s Robot Vacuum Mop which I’m reviewing here. The successor to the ILife A9s, the A10s features laser navigation, which also enables it to save maps of your home and follow specific cleaning instructions based on its layout. Is this the best cleaning robot you can buy right now? Find out in this review.
What is the ILife A10s, and what’s in the box?
Like its predecessor the A9s, the ILife A10s is a cleaning robot which can vacuum and mop. It has a typical disc-shaped body with wheels at the bottom to move around. There are two sweeping brushes at the front, the vacuum zone in the middle, and space for a removable module at the back. For vacuuming, you have to have the dust bin module fitted there, and for mopping, the water reservoir module snaps into place.
The water reservoir module has a cloth which attaches at the bottom. ILife states that the mop fitting has a ‘vibrating tank’ function which moves in all directions to release water, which lets it mop gently and effectively when moving around.
Apart from the sweeping brushes at the front, the vacuum zone also has a roller brush to direct dirt and impurities into the dust bin, and a dust filter to filter out fine particles. In the retail package, you get a charging dock and plate, an adapter to power the charging dock, and a remote control to manually control the ILife A10s without the app.
The power adapter can be directly connected to the robot itself, to charge it without the dock. The robot has a physical power switch, and it is recommended that it be left on at all times, parked on the charging dock when not in use. The remote runs on two AAA batteries, and it can be used to start cleaning, send the robot back to the charging dock, or manually drive it around, all by pointing it at the robot and pressing the right buttons.
Spares for the ILife A10s, including extra sweeping brushes, a rubber roller brush, and an extra dust filter, are included in the box. The cleaning robot has a flexible front bumper to protect it from collisions, and a raised module at the top for the laser navigation equipment.
ILife A10s navigation and mapping
Unlike the A9s which relies on a camera to navigate, the ILife A10s is equipped with laser navigation, which is known to be more accurate and more sensitive to obstacles in the cleaning area. This also makes the robot capable of working in dark rooms. The A10s can store maps of your home, which can then be used to customise the cleaning routine by setting no-go and carpet zones, invisible walls, room divisions, and more.
Competing products in the cleaning robot segment such as the 360 S7 and Mi Robot Vacuum Mop-P use laser navigation to good effect, and the ILife A10s does indeed come close when it comes to navigational accuracy. In my experience, the device moved quickly and was generally able to avoid collisions with obstacles, including walls and the legs of tables and chairs.
However, I did find that the device needed specific guidance by way of setting up no-go zones and carpeted areas through the app. I needed to move objects such as loose rugs and wires out of the way. The ILife A10s did, on occasion, get stuck in sliding door tracks, and got the tassels at the edges of a rug stuck in its wheels. Navigation isn’t as flawless on this device as I’ve seen on competing options.
When properly set up and with any potential obstacles out of the way, the ILife A10s moved quickly and in a predictable and sensible path to complete its cleaning task. It was able to fully clean my 900 square-foot home once in around 45 minutes when vacuuming, and took roughly the same amount of time to mop the same space.
ILife A10s app
The ILife A10s robot vacuum mop can be controlled using the ILife Home app, available for Android and iOS. Although I did sometimes find it quicker to use the remote or even just press the buttons on the device itself, the app allowed for much more specific control over the functions of the robot. These include controlling and monitoring it remotely even if you aren’t at home, managing maps, setting an order or specific room list for cleaning, creating restricted zones and invisible walls, and more.
Setting up the robot for the first time took a while, but once complete, I didn’t have any connectivity or usage issues with the app during my time with it. The default screen of the ILife A10s app is your home map, along with status indicators that tell you the cleaning area covered and time taken (when in use), plus the charging and battery status. You can also set the suction power, side brush speed, and water usage level, as well as update the firmware, set schedules, and see logs of past cleaning tasks.
Usefully, you can have the app installed on multiple devices, so different members of your family can control it as necessary, unlike the 360 S7 which can only be used on one device at a time. The app is generally very easy to use, and shows a live view of the robot’s location within your home while cleaning, as well as the areas covered and time taken. All of this does, of course, need your robot to have a stable link with your Wi-Fi connection to work properly.
ILife A10s cleaning
Although not as intuitive with navigation as competing products, and with an app that feels a bit more simple than the companion apps from 360 and Xiaomi, the ILife A10s robot vacuum mop is among the more effective cleaning robots around. The company hasn’t specified the suction power of the vacuum cleaner, but it’s more than enough for everyday cleaning of hard floors.
Having two sweeping brushes makes the ILife A10s a lot more competent at sweeping dirt out from its path and into the vacuum zone to pick up, including along edges and in corners. While no cleaning robot is completely effective, the ILife A10s does a better job than most competing products which have just a single sweeping brush. Even with dry spills resulting in a bit more mess to pick up, the robot was able to clean the area effectively enough.
However, as with any cleaning robot, you will still have to manually sweep dirt out from edges, corners, and hard-to-reach places every few days, or use a handheld manual vacuum cleaner such as the Dyson Omni-glide. I found that the A10s was very effective at vacuuming with its suction power set to around the 80 percent mark, and this also kept it from making too much noise while cleaning.
For mopping, the ILife A10s uses a separate fitting that holds water and vibrates when working to sprinkle it. Although this fitting does have a small dustbin area to hold dirt captured by the vacuum cleaner, it’s best to run the vacuum cleaner with its dedicated dustbin fitting, which is larger and more effective at holding all the dirt accumulated over a typical household run. The mop tank can hold more than enough water for a full home cleaning, and has a mop cloth attached at the bottom to wipe up the released water.
When using the mop fitting, the ILife A10s is very good at mopping, doing a better job than the 360 S7 and Mi Robot Vacuum Mop-P. It isn’t recommended to add any cleaning agents or additives to the water tank, but I did sprinkle a few drops on the floor before any mopping tasks, to good effect.
As with all cleaning robots, regular maintenance is necessary with the ILife A10s in order to keep things running smoothly. This includes cleaning and untangling things from the sweeping brushes and main brush, keeping the water tank topped up, emptying the dustbin, and cleaning the mop cloth. Without regular maintenance, the ILife A10s can have considerably reduced cleaning efficiency. The app helps you keep track of the health of the consumable parts such as the brushes and filter, and these will also need periodic replacement.
ILife A10s battery and charging
The ILife A10s has a 2,900mAh battery, with a claimed runtime of 80-100 minutes per charge. This was enough to both vacuum and mop my 900 square-foot home. It took around 90 minutes to complete both tasks when run one after the other. Although the app does not show the specific battery level of the device, it reported that the battery was almost empty after around 90 minutes of running.
From this point, the ILife A10s took around four hours to recharge fully. Charging is slow, but assuming you only need to run the robot once a day for vacuuming and mopping, this shouldn’t pose too much of a problem.
The docking station needs to be placed in an area that is easily accessible and visible to the ILife A10s. The device is able to drive itself back onto the dock, and is even able to use its generated map of your home to find the dock from a different room with no direct line of sight. Usefully, you can also plug the charger directly into the robot; this was necessary on a couple of occasions when the battery ran out completely and the robot was unable to start charging on the dock.
Verdict
ILife is an established brand when it comes to cleaning robots in India and across Asia, and the A10s is a decent option to consider for under Rs. 40,000. Laser navigation is a big advantage on this model over its predecessor, and this enables mapping, room-wise cleaning, the ability to set invisible boundaries and no-go zones, and much more. Usefully, the cleaning remains competent, as long as you’re willing to vacuum and mop in separate runs.
Although I did face some issues with navigation, my experience with the ILife A10s was pleasant on the whole, and I found that the effectiveness of its cleaning made up for these small shortcomings. That said, I found the overall user experience a lot better with options such as the 360 S7 and Mi Robot Vacuum Mop-P; the ILife A10s simply isn’t as ‘smart’ as the competition, even with the advantage of laser navigation.
Price: Rs. 34,900
Rating: 7/10
Pros:
- Effective vacuuming and mopping
- Remote is very useful
- Laser navigation and mapping
- Easy to use app
Cons:
- Vacuuming and mopping have to be done separately
- Minor navigation issues
Smart home
Apple Might Be Thinking of Making Its Own TV Set, but There’s a Catch
Apple TV Set Could Compete With Offerings From Popular TV Manufacturers
Gurman writes that Apple is “evaluating” the development of an “Apple-branded TV set” in his newsletter, which suggests that the company is at a very early stage. However, MacRumors points out that this is not the first time that word of Apple’s plans to make its own TV have surfaced online — the company was rumoured to be developing its own TV as early as 2009.
Apple’s purported TV set would arrive as part of several smart devices being developed by the company, according to Gurman. The journalist previously revealed that the first of these devices would be a wall-mounted smart home hub that could control other devices and offer support for features like video calling.
However, Gurman says that if the smart home hub fails, Apple could “rethink its smart home ambitions once again”. The company is said to be working on a more advanced version of the smart home hub, equipped with a robotic arm, that could arrive with a higher $1,000 (roughly Rs. 84,400) price tag.
If the company is thinking of developing its own TV set, the company would face competition from several manufacturers such as Sony, Samsung, LG, and Sharp — these firms offer a range of TVs across price models, while Apple can be expected to introduce a model with high-end specifications.
Apple’s TV set could also offer support for features available on its TV box that include Siri, HomeKit, and more. It’s currently unclear whether Apple will use the same operating system — tvOS — on the purported TV set.
For the latest tech news and reviews, follow Gadgets 360 on X, Facebook, WhatsApp, Threads and Google News. For the latest videos on gadgets and tech, subscribe to our YouTube channel. If you want to know everything about top influencers, follow our in-house Who’sThat360 on Instagram and YouTube.
Smart home
Apple Could Launch an ‘AI Wall Tablet’ With Home Controls, Video Calling
Apple’s Wall-Mounted Display Might Not Support Third-Party Apps
According to the report, Apple’s first smart home device powered by Apple Intelligence will comprise a 6-inch display that appears to resemble two iPhone units placed next to each other. It will reportedly be equipped with a camera and built-in speakers that enable support for video calls, and it can be used with optional bases that are equipped with speakers.
Apple is also developing a new operating system for the new wall-mounted display that is codenamed “Pebble”, according to Bloomberg. It will reportedly feature a customisable home screen that shows icons for various apps, while widgets will provide information at a glance.
The first-generation smart home device, codenamed J490, is expected to feature support for the company’s applications such as Apple News, Apple Music, FaceTime, and Safari, but it is unlikely to include an App Store, as per the report.
While the wall-mounted display is expected to operate independently, it will reportedly require an iPhone to be set up. There’s no word on the hardware powering the device, but we can expect to offer performance on par with Apple’s A17 Pro chip or an M1 chip, along with 8GB of RAM.
Apple has spent over three years on developing the new wall-mounted display and the company plans to launch the device in March 2025, according to the report. It could be available in black and silver colourways.
Meanwhile, another advanced smart home device that is equipped with a robotic arm that can move a display is reportedly in development. It is unclear when Apple plans to launch this device, but it could be priced as high as $1,000 (roughly Rs. 84,400). Meanwhile, the wall-mounted display is expected to have a much lower price tag, according to the report.
Smart home
Apple Supplier Goertek Could Produce These Two New Products Coming in 2026
Apple Picks Goertek to Produce New Products Arriving in 2026
In a post on Medium, Kuo states that Apple is planning to launch its first smart home IP camera device in 2026, which will offer wireless connectivity with Apple’s other devices, as well as software integration with Siri and Apple Intelligence. According to supply chain analyst, the company is looking at a long-term goal of annual shipments of over 10 million, and has picked China-based Goertek to be the sole assembler for the product.
Apple’s second product will be an upgraded version of the company’s AirPods truly wireless stereo (TWS) earphones, Kuo claims. The analyst predicts that the company’s upcoming AirPods will also focus on health-related features, and that these earphones will be assembled by Goertek
Earlier this year, Apple announced that the AirPods Pro (2nd Generation) would be updated with support for using the headset as a hearing aid — the company received approval from the US FDA in September.
In 2023, a patent related to a wireless audio product was spotted online, that suggested Apple was working on AirPods sensors that could measure brain electrical activity, while another report claimed that Apple was designing a new AirPods Pro model that could monitor body temperature using inbuilt sensors.
Citing supply chain reports, Kuo claims that Goertek’s relationship has Apple has “normalised” in the second half of 2024, months after it lost many orders due to “supply compliance issues”. Goertek is expected to be the sole supplier for the smart home IP camera, and the primary supplier for the next-generation AirPods.
-
Solar Energy3 years ago
DLR testing the use of molten salt in a solar power plant in Portugal
-
world news1 year ago
Gulf, France aid Gaza, Russia evacuates citizens
-
Camera1 year ago
DJI Air 3 vs. Mini 4 Pro: which compact drone is best?
-
world news1 year ago
Strong majority of Americans support Israel-Hamas hostage deal
-
Camera4 years ago
Charles ‘Chuck’ Geschke, co-founder of Adobe and inventor of the PDF, dies at 81
-
Camera1 year ago
Sony a9 III: what you need to know
-
Solar Energy12 months ago
Glencore eyes options on battery recycling project
-
TOP SCEINCE7 months ago
Can animals count?