Solar Energy

Research explores wildfire smoke’s effect on solar power generation across US

Published

4 weeks ago

January 10, 2025

sarosh

Research explores wildfire smoke’s effect on solar power generation across US

by Clarence Oxford

Los Angeles CA (SPX) Jan 10, 2025

New findings from Colorado State University reveal that while wildfire smoke increasingly blankets vast areas of the United States, its impact on long-term solar power generation remains relatively minimal.

Published in Nature Communications, the study highlights that reductions in average photovoltaic solar output due to wildfire smoke are typically modest, except in regions directly surrounding active fires where dense smoke plumes prevail. Despite recent intense wildfire seasons, photovoltaic power generation has shown stability across the U.S., even during extreme events.

The CSU-led team employed a mix of modeled and historical data spanning multiple wildfire seasons to assess baseline solar resource changes linked to smoke. Postdoctoral Fellow Kimberley Corwin, the paper’s lead author, emphasized the importance of the findings as the nation seeks to expand solar energy’s contribution to its energy mix from 3% to 45%.

“There has been similar research into specific events – particularly around the larger fires in California. Our work, however, goes further and quantifies the effects over large timescales and geographies,” Corwin explained. “We show there are significant impacts to solar power resources near these fires, but that when smoke is transported farther away, as we have seen in the Midwest and along the East Coast recently, it presents much less of a concern in terms of prolonged solar losses. That has implications for where upcoming facilities should be placed for long-term efficiency as well as stability with the grid.”

The research team focused on the effects of smoke on Global Horizontal Irradiance (GHI) – a measure of total solar energy reaching the Earth’s surface, including both direct and scattered sunlight. GHI is particularly relevant to flat-plate photovoltaic systems, which dominate U.S. solar energy production.

To contextualize their findings, the team analyzed daily case studies from the highly active 2020 wildfire season in California and the quieter 2019 season. These were complemented by monthly and yearly aggregations of smoke impacts at state, regional, and national levels. Advanced satellite-based tools, such as the NOAA Hazard Mapping System Smoke product, helped the researchers measure impacts across varying scales.

The study noted that while smoke plumes from fires in California, Colorado, and Oregon in 2020 reached the East Coast, their effect on solar power was largely transient. “While you do see large reductions close to active fires, that drops off quickly with distance,” Corwin said.

“Substantial losses are specific to the area directly around the fire where the smoke column is denser and therefore blocks more of the light. Meanwhile, the impact of the large, transported plumes that can linger for days but are dilute, is relatively modest compared to the average solar resource change you may see under other conditions. The decreases from transported smoke are only about 5% and – in some places – even less than 2% versus the average in low smoke years.”

Improved battery storage could further mitigate short-term disruptions caused by wildfires, Corwin added. Enhanced storage capacity would enable operators to rely on reserves instead of turning to natural gas to offset temporary power deficits near fire zones.

Corwin initiated this research as part of her doctoral studies in Atmospheric Sciences under Professor Emily Fischer. Her work was supported by funding from NASA, a CSU Food-Energy-Water Systems graduate program, and the CSU SoGES GCRT grant. Co-authors include CSU’s Jesse Burkhardt, Amit Munshi, and Fischer.

Professor Fischer called Corwin’s work a “critical step in understanding the full implications of climate-driven increases in wildfire smoke.” She added, “This paper, and the other chapters of Kimberley’s dissertation, have radically expanded our understanding of how smoke impacts the light at the ground needed for photosynthesis, solar power generation, and also the impacts on other aspects of air quality.”

Research Report:Solar energy resource availability under extreme and historical wildfire smoke conditions

Source link

Solar Energy

Advancing safer lithium energy storage

Published

1 day ago

February 4, 2025

sarosh

Advancing safer lithium energy storage

by Erica Marchand

Paris, France (SPX) Feb 04, 2025

Charging our phones has become so routine that we rarely reflect on the breakthrough that made it possible. Rechargeable lithium-ion batteries, introduced commercially in the 1990s, propelled a technological revolution that earned their creators the 2019 Nobel Prize in Chemistry. This key innovation underpins the functionality of today’s smartphones, wireless headphones, and electric vehicles, making them both financially and environmentally practical.

As our devices grow more advanced, the demand for batteries that pack more power while remaining safe continues to rise. Yet engineering such power sources is far from simple. One promising design is the lithium metal battery, which could deliver more stored energy than standard battery types. Unfortunately, its potential is curtailed by a persistent issue: the emergence of tiny threads, or dendrites, that accumulate with each charge. When dendrites build up, they can form metallic connections that degrade battery functionality and pose a serious fire hazard. Until recently, researchers had limited approaches to probe and understand dendrite formation. In a new study led by Dr. Ayan Maity in the lab of Prof. Michal Leskes at the Weizmann Institute of Science’s Molecular Chemistry and Materials Science Department, scientists developed a novel method to identify the factors that spark dendrite growth, as well as to rapidly evaluate various battery components for improved safety and performance.

Rechargeable batteries function by allowing positively charged ions to migrate between the anode (negative electrode) and the cathode (positive electrode) through an electrolyte. Charging forces the ions back into the anode, counter to the usual flow in a typical chemical reaction, thus preparing the battery for another cycle of use. Lithium metal batteries take a different approach by employing a pure lithium metal anode, enabling higher energy storage. However, lithium metal is chemically reactive and quickly forms dendrites when it interacts with the electrolyte. Over time, enough dendrites can short-circuit the battery and raise the likelihood of combustion.

One way to avoid fire risks is to replace the volatile liquid electrolyte with a solid, nonflammable one, often comprising a polymer-ceramic composite. While altering the ratio of polymer to ceramic can influence dendrite growth, finding the ideal formulation remains a challenge for extending battery life.

To investigate, the team employed nuclear magnetic resonance (NMR) spectroscopy, a standard tool for pinpointing chemical structures, and tracked both dendrite formation and the chemical interplay within the electrolyte. “When we examined the dendrites in batteries with differing ratios of polymer and ceramic, we found a kind of ‘golden ratio’: Electrolytes that are composed of 40 percent ceramic had the longest lives,” Leskes explains. “When we went above 40 percent ceramic, we encountered structural and functional problems that impeded battery performance, while less than 40 percent led to reduced battery life.” Intriguingly, batteries with that optimal ratio displayed more dendrites overall, but those dendrites were effectively confined in a way that prevented destructive bridging.

These insights prompted a larger question: what halts the extension of the dendrites? The team hypothesized that a thin covering on the surface of dendrites, called the solid electrolyte interphase (SEI), might be crucial. This layer, formed when dendrites interact with the electrolyte, can affect how lithium ions travel through the battery, and it can also either prevent or accelerate the movement of harmful substances between electrodes. Both of these factors, in turn, can stifle or foster further dendrite development.

Probing the chemical composition of such thin SEI films is inherently difficult, since they measure only a few dozen nanometers thick. The researchers tackled this problem by enhancing the signals in their NMR data using dynamic nuclear polarization. This specialized technique leverages the strong spin of polarized lithium electrons, bolstering signals from the atomic nuclei in the SEI and exposing its chemical makeup. Through this refined lens, the researchers discovered precisely how lithium metal interacts with polymer or ceramic materials, revealing that certain SEI layers can simultaneously improve ion transport and block hazardous substances.

Their findings pave the way to design sturdier, safer, and more powerful batteries that will store greater energy for a longer duration with reduced environmental and economic costs. Such next-generation batteries could power larger devices without having to increase the physical size of the battery itself, while also extending the battery’s life cycle.

“One of the things I love most about this study is that, without a profound scientific understanding of fundamental physics, we would not have been able to understand what happens inside a battery. Our process was very typical of the work here at the Weizmann Institute. We started with a purely scientific question that had nothing to do with dendrites, and this led us to a study with practical applications that could improve everybody’s life,” Leskes says.

Research Report:Tracking dendrites and solid electrolyte interphase formation with dynamic nuclear polarization-NMR spectroscopy

Source link

Solar Energy

Role of barrier films in maintaining the stability of perovskite solar cells

Published

2 days ago

February 3, 2025

sarosh

Role of barrier films in maintaining the stability of perovskite solar cells

by Riko Seibo

Tokyo, Japan (SPX) Jan 31, 2025

Perovskite solar cells (PSCs) offer a promising advancement in renewable energy due to their high efficiency, lightweight, and flexible properties. However, their commercial viability is challenged by their vulnerability to environmental conditions, particularly heat and humidity.

To tackle this issue, a research team led by Professor Takashi Minemoto, a Fellow at the Ritsumeikan Advanced Research Academy, alongside Dr. Abdurashid Mavlonov from Ritsumeikan University’s Research Organization of Science and Technology and Dr. Akinobu Hayakawa from Sekisui Chemical Co., Ltd., conducted an in-depth study on the durability of PSC modules under harsh environmental conditions. Their research, published in Volume 286 of *Solar Energy* on January 15, 2025, was first made available online on December 17, 2024.

Discussing the study’s motivation, Prof. Minemoto stated, “Perovskite solar cells stand out as particularly promising due to their low-temperature wet-coating process and compatibility with flexible substrates, offering unique opportunities for the solar industry. However, the stability of perovskite is weak compared with conventional material, which can be improved by fabrication processes such as encapsulation with barrier films.”

For this research, the team analyzed the durability of flexible PSC modules made from methylammonium lead iodide (MAPbI3) and encapsulated them using polyethylene terephthalate (PET) substrates with barrier films of varying water vapor transmission rates (WVTR). These modules were subjected to a damp heat test at 85 C and 85% relative humidity to replicate long-term outdoor conditions.

After 2,000 hours of exposure, researchers measured photovoltaic (PV) performance and assessed module degradation using current-voltage characteristics, spectral reflectance, and electroluminescence imaging. The findings confirmed that high humidity caused the MAPbI3 layer to break down into lead iodide, obstructing charge transport and significantly reducing the efficiency of the PSC modules.

Moreover, the study demonstrated the critical role of barrier films in maintaining module stability. Notably, the module with the lowest WVTR barrier retained 84% of its initial power conversion efficiency, whereas modules with higher WVTR deteriorated rapidly, ceasing to function after just 1,000 hours.

“Our study is the first to report the durability of encapsulated flexible MAPbI3-based PSC modules. When considering solar energy applications for walls and rooftops with weight limits or for mobile platforms, flexible PSCs are a great alternative to the traditional silicon panels. Insights from our study could help industries optimize these modules for highly stable and durable constructs,” explained Prof. Minemoto.

This research underscores the essential role of barrier films in ensuring the long-term viability of flexible PSC modules, which could reshape the photovoltaic industry. By enabling energy generation in a variety of locations, these advancements help alleviate pressure on power grids. Additionally, enhancing the durability of PSCs expands their usability across different environments, further accelerating the global transition to cleaner and more sustainable energy solutions.

Research Report:Perovskite solar cell modules: Understanding the device degradation via damp heat testing

Source link

Solar Energy

Enhancing Durability and Efficiency in Tin-based Perovskite Solar Cells

Published

2 days ago

February 3, 2025

sarosh

Enhancing Durability and Efficiency in Tin-based Perovskite Solar Cells

by Riko Seibo

Tokyo, Japan (SPX) Jan 30, 2025

Tin-based perovskite solar cells are being hailed as a promising alternative for next-generation solar energy solutions due to their high efficiency, flexibility, and the potential for low-cost printing. However, replacing lead with tin to avoid environmental issues linked to lead toxicity presents its own challenges. Tin’s propensity to oxidize quickly results in reduced performance and durability compared to lead-based counterparts.

Researchers have developed a method to enhance the stability of tin-based perovskite by incorporating large organic cations into the perovskite structure. This results in a unique two-dimensional layered configuration known as Ruddlesden-Popper (RP) tin-based perovskites. Despite its potential, the precise internal structure and the mechanism through which this configuration improves performance have remained unclear.

In this study, researchers employed electron spin resonance (ESR) to analyze the internal behavior of the RP perovskite solar cell during operation at a microscopic level. Their findings revealed two key insights about the interaction of the materials under different conditions.

First, when the RP perovskite solar cell was not exposed to light, the holes in the hole transport layer diffused into the RP perovskite. This movement created an energy barrier at the interface between the hole transport layer and the RP tin perovskite, preventing electron backflow and leading to better performance.

Second, when exposed to sunlight, the high-energy electrons produced by short-wavelength light (such as ultraviolet rays) moved from the RP tin perovskite to the hole transport layer. This transfer further elevated the energy barrier, thereby enhancing the device’s efficiency.

Understanding the mechanisms behind these performance improvements is crucial for developing tin-based perovskite solar cells with greater efficiency and longer lifespans. These findings could provide important insights for future advancements in the field of solar energy.

Research Report:Operando spin observation elucidating performance-improvement mechanisms during operation of Ruddlesden-Popper Sn-based perovskite solar cells