Connect with us

TOP SCEINCE

Morphing facial technology sheds light on the boundaries of self-recognition

Published

on

Morphing facial technology sheds light on the boundaries of self-recognition


Facial recognition is a critical part of self-image and social interactions. In an era of advanced digital technology, we face intriguing questions about communication and identity. How does altering our facial identity affect our sense of “self” and our interactions with others? These are questions Dr. Shunichi Kasahara, a researcher in the Cybernetic Humanity Studio at the Okinawa Institute of Science and Technology (OIST) is investigating, using real-time morphing of facial images (turning our faces into someone else’s and vice versa). The studio was established in 2023 as a platform for joint research between OIST and Sony Computer Science Laboratories, Inc.

Dr. Kasahara and his collaborators have investigated the dynamics of face recognition using motor-visual synchrony — the coordination between a person’s physical movements and the visual feedback they receive from those movements. They found that whether we influence the movement of our self-image or not, levels of identification with our face remain consistent. Therefore, our sense of agency, or subjective feelings of control, do not impact our level of identification with our self-image. Their results have been published in Scientific Reports.

The effect of agency on perceptions of identity

With psychological experiments using displays and cameras, the scientists investigated where the “self-identification boundary” is and what impacts this boundary. Participants were seated and asked to look at screens showing their faces gradually changing. At some point, the participants could notice a change in their facial identity and were asked to press a button when they felt that the image on the screen was no longer them. The experiment was done in both directions: the image changing from self to other and other to self.

“It’s like watching your face in a mirror as you move it and you identify yourself, but your face slowly changes up to a point and you realize this is no longer you,” Dr. Kasahara explained.

The researchers examined how three movement conditions affect the facial boundary: synchronous, asynchronous, and static. They hypothesized that if the motions are synchronized, participants would identify with the images to a greater extent. Surprisingly, they found that whether movements were synchronized or not, their facial identity boundaries were similar. Additionally, participants were more likely to identify with static images of themselves than images with their faces moving.

Interestingly, the direction of morphing — whether from self to other or other to self — influenced how participants perceived their own facial boundaries: participants were more likely to identify with their facial images when these images morphed from self to other rather than from other to self. Overall, the results suggest that a sense of agency of facial movements does not significantly impact our ability to judge our facial identity.

“Consider the example of deepfakes, which are essentially a form of asynchronous movement. When I remain still but the visual representation moves, it creates an asynchronous situation. Even in these deepfake scenarios, we can still experience a feeling of identity connection with ourselves,” Dr. Kasahara explained. “This suggests that even when we see a fake or manipulated version of our image, for example, someone else using our face, we might still identify with that face. Our findings raise important questions about our perception of self and identity in the digital age.”

How does identity impact perceptions of control?

What about the other way around? How does our sense of identity impact our sense of agency? Dr. Kasahara recently published a paper in collaboration with Professor of Psychology at Rikkyo University, Dr. Wen Wen, who specializes in research on our sense of agency. They investigated how recognizing oneself through facial features might affect how people perceive control over their own movements.

During experiments, participants observed either their own face or another person’s face on a screen and could interact and control the facial and head movements. They were asked to observe the screen for about 20 seconds while moving their faces and changing their facial expressions. The motion of the face was controlled either only by their own facial and head motion or by an average of the participant’s and the experimenter’s motion (full control vs. partial control). Thereafter, they were asked “how much did you feel that this face looks like you?” and “how much control did you feel over this presented face?”

Again, the main findings were intriguing: participants reported a higher sense of agency over the “other face” rather than the “self-face.” Additionally, controlling someone else’s face resulted in more variety of facial movements than controlling one’s own face.

“We gave the participants a different face, but they could control the facial movements of this face — similar to deepfake technology, where AI can transfer movement to other objects. This AI technology allows us to go beyond the conventional experience of simply looking into a mirror, enabling us to disentangle and investigate the relationship between facial movements and visual identity,” Dr. Kasahara stated.

“Based on previous research, one might expect that if I see my own face, I will feel more control over it. Conversely, if it’s not my face, I might expect to feel less control because it’s someone else’s face. That’s the intuitive expectation. However, the results are the opposite — when people see their own face, they report a lower sense of agency. Conversely, when they see another person’s face, they’re more likely to feel a sense of agency.” These surprising results challenge what we thought we knew about how we see ourselves in images.

Dr. Kasahara emphasized that the acceptance of technology in society plays a crucial role in technological advancements and human evolution: “The relationship between technology and human evolution is cyclical; we evolve together. But concerns about certain computer technology may lead to restrictions. My goal is to help foster acceptance within society and update our understanding of “the self” in relation to human-computer integration technology.”



Source link

Continue Reading
Click to comment

Leave a Reply

TOP SCEINCE

Early dark energy could resolve cosmology’s two biggest puzzles

Published

on

By

Morphing facial technology sheds light on the boundaries of self-recognition


A new study by MIT physicists proposes that a mysterious force known as early dark energy could solve two of the biggest puzzles in cosmology and fill in some major gaps in our understanding of how the early universe evolved.

One puzzle in question is the “Hubble tension,” which refers to a mismatch in measurements of how fast the universe is expanding. The other involves observations of numerous early, bright galaxies that existed at a time when the early universe should have been much less populated.

Now, the MIT team has found that both puzzles could be resolved if the early universe had one extra, fleeting ingredient: early dark energy. Dark energy is an unknown form of energy that physicists suspect is driving the expansion of the universe today. Early dark energy is a similar, hypothetical phenomenon that may have made only a brief appearance, influencing the expansion of the universe in its first moments before disappearing entirely.

Some physicists have suspected that early dark energy could be the key to solving the Hubble tension, as the mysterious force could accelerate the early expansion of the universe by an amount that would resolve the measurement mismatch.

The MIT researchers have now found that early dark energy could also explain the baffling number of bright galaxies that astronomers have observed in the early universe. In their new study, reported in the Monthly Notices of the Royal Astronomical Society, the team modeled the formation of galaxies in the universe’s first few hundred million years. When they incorporated a dark energy component only in that earliest sliver of time, they found the number of galaxies that arose from the primordial environment bloomed to fit astronomers’ observations.

You have these two looming open-ended puzzles,” says study co-author Rohan Naidu, a postdoc in MIT’s Kavli Institute for Astrophysics and Space Research. “We find that in fact, early dark energy is a very elegant and sparse solution to two of the most pressing problems in cosmology.”

The study’s co-authors include lead author and Kavli postdoc Xuejian (Jacob) Shen, and MIT professor of physics Mark Vogelsberger, along with Michael Boylan-Kolchin at the University of Texas at Austin, and Sandro Tacchella at the University of Cambridge.

Big city lights

Based on standard cosmological and galaxy formation models, the universe should have taken its time spinning up the first galaxies. It would have taken billions of years for primordial gas to coalesce into galaxies as large and bright as the Milky Way.

But in 2023, NASA’s James Webb Space Telescope (JWST) made a startling observation. With an ability to peer farther back in time than any observatory to date, the telescope uncovered a surprising number of bright galaxies as large as the modern Milky Way within the first 500 million years, when the universe was just 3 percent of its current age.

“The bright galaxies that JWST saw would be like seeing a clustering of lights around big cities, whereas theory predicts something like the light around more rural settings like Yellowstone National Park,” Shen says. “And we don’t expect that clustering of light so early on.”

For physicists, the observations imply that there is either something fundamentally wrong with the physics underlying the models or a missing ingredient in the early universe that scientists have not accounted for. The MIT team explored the possibility of the latter, and whether the missing ingredient might be early dark energy.

Physicists have proposed that early dark energy is a sort of antigravitational force that is turned on only at very early times. This force would counteract gravity’s inward pull and accelerate the early expansion of the universe, in a way that would resolve the mismatch in measurements. Early dark energy, therefore, is considered the most likely solution to the Hubble tension.

Galaxy skeleton

The MIT team explored whether early dark energy could also be the key to explaining the unexpected population of large, bright galaxies detected by JWST. In their new study, the physicists considered how early dark energy might affect the early structure of the universe that gave rise to the first galaxies. They focused on the formation of dark matter halos — regions of space where gravity happens to be stronger, and where matter begins to accumulate.

“We believe that dark matter halos are the invisible skeleton of the universe,” Shen explains. “Dark matter structures form first, and then galaxies form within these structures. So, we expect the number of bright galaxies should be proportional to the number of big dark matter halos.”

The team developed an empirical framework for early galaxy formation, which predicts the number, luminosity, and size of galaxies that should form in the early universe, given some measures of “cosmological parameters.” Cosmological parameters are the basic ingredients, or mathematical terms, that describe the evolution of the universe.

Physicists have determined that there are at least six main cosmological parameters, one of which is the Hubble constant — a term that describes the universe’s rate of expansion. Other parameters describe density fluctuations in the primordial soup, immediately after the Big Bang, from which dark matter halos eventually form.

The MIT team reasoned that if early dark energy affects the universe’s early expansion rate, in a way that resolves the Hubble tension, then it could affect the balance of the other cosmological parameters, in a way that might increase the number of bright galaxies that appear at early times. To test their theory, they incorporated a model of early dark energy (the same one that happens to resolve the Hubble tension) into an empirical galaxy formation framework to see how the earliest dark matter structures evolve and give rise to the first galaxies.

“What we show is, the skeletal structure of the early universe is altered in a subtle way where the amplitude of fluctuations goes up, and you get bigger halos, and brighter galaxies that are in place at earlier times, more so than in our more vanilla models,” Naidu says. “It means things were more abundant, and more clustered in the early universe.”

“A priori, I would not have expected the abundance of JWST’s early bright galaxies to have anything to do with early dark energy, but their observation that EDE pushes cosmological parameters in a direction that boosts the early-galaxy abundance is interesting,” says Marc Kamionkowski, professor of theoretical physics at Johns Hopkins University, who was not involved with the study. “I think more work will need to be done to establish a link between early galaxies and EDE, but regardless of how things turn out, it’s a clever — and hopefully ultimately fruitful — thing to try.”

We demonstrated the potential of early dark energy as a unified solution to the two major issues faced by cosmology. This might be an evidence for its existence if the observational findings of JWST get further consolidated,” Vogelsberger concludes. “In the future, we can incorporate this into large cosmological simulations to see what detailed predictions we get.”

This research was supported, in part, by NASA and the National Science Foundation.



Source link

Continue Reading

TOP SCEINCE

Plant-derived secondary organic aerosols can act as mediators of plant-plant interactions

Published

on

By

Morphing facial technology sheds light on the boundaries of self-recognition


A new study published in Science reveals that plant-derived secondary organic aerosols (SOAs) can act as mediators of plant-plant interactions. This research was conducted through the cooperation of chemical ecologists, plant ecophysiologists and atmospheric physicists at the University of Eastern Finland.

It is well known that plants release volatile organic compounds (VOCs) into the atmosphere when damaged by herbivores. These VOCs play a crucial role in plant-plant interactions, whereby undamaged plants may detect warning signals from their damaged neighbours and prepare their defences. “Reactive plant VOCs undergo oxidative chemical reactions, resulting in the formation of secondary organic aerosols (SOAs). We wondered whether the ecological functions mediated by VOCs persist after they are oxidated to form SOAs,” said Dr. Hao Yu, formerly a PhD student at UEF, but now at the University of Bern.

The study showed that Scots pine seedlings, when damaged by large pine weevils, release VOCs that activate defences in nearby plants of the same species. Interestingly, the biological activity persisted after VOCs were oxidized to form SOAs. The results indicated that the elemental composition and quantity of SOAs likely determines their biological functions.

“A key novelty of the study is the finding that plants adopt subtly different defence strategies when receiving signals as VOCs or as SOAs, yet they exhibit similar degrees of resistance to herbivore feeding,” said Professor James Blande, head of the Environmental Ecology Research Group. This observation opens up the possibility that plants have sophisticated sensing systems that enable them to tailor their defences to information derived from different types of chemical cue.

“Considering the formation rate of SOAs from their precursor VOCs, their longer lifetime compared to VOCs, and the atmospheric air mass transport, we expect that the ecologically effective distance for interactions mediated by SOAs is longer than that for plant interactions mediated by VOCs,” said Professor Annele Virtanen, head of the Aerosol Physics Research Group. This could be interpreted as plants being able to detect cues representing close versus distant threats from herbivores.

The study is expected to open up a whole new complex research area to environmental ecologists and their collaborators, which could lead to new insights on the chemical cues structuring interactions between plants.



Source link

Continue Reading

TOP SCEINCE

Folded or cut, this lithium-sulfur battery keeps going

Published

on

By

Morphing facial technology sheds light on the boundaries of self-recognition


Most rechargeable batteries that power portable devices, such as toys, handheld vacuums and e-bikes, use lithium-ion technology. But these batteries can have short lifetimes and may catch fire when damaged. To address stability and safety issues, researchers reporting in ACS Energy Letters have designed a lithium-sulfur (Li-S) battery that features an improved iron sulfide cathode. One prototype remains highly stable over 300 charge-discharge cycles, and another provides power even after being folded or cut.

Sulfur has been suggested as a material for lithium-ion batteries because of its low cost and potential to hold more energy than lithium-metal oxides and other materials used in traditional ion-based versions. To make Li-S batteries stable at high temperatures, researchers have previously proposed using a carbonate-based electrolyte to separate the two electrodes (an iron sulfide cathode and a lithium metal-containing anode). However, as the sulfide in the cathode dissolves into the electrolyte, it forms an impenetrable precipitate, causing the cell to quickly lose capacity. Liping Wang and colleagues wondered if they could add a layer between the cathode and electrolyte to reduce this corrosion without reducing functionality and rechargeability.

The team coated iron sulfide cathodes in different polymers and found in initial electrochemical performance tests that polyacrylic acid (PAA) performed best, retaining the electrode’s discharge capacity after 300 charge-discharge cycles. Next, the researchers incorporated a PAA-coated iron sulfide cathode into a prototype battery design, which also included a carbonate-based electrolyte, a lithium metal foil as an ion source, and a graphite-based anode. They produced and then tested both pouch cell and coin cell battery prototypes.

After more than 100 charge-discharge cycles, Wang and colleagues observed no substantial capacity decay in the pouch cell. Additional experiments showed that the pouch cell still worked after being folded and cut in half. The coin cell retained 72% of its capacity after 300 charge-discharge cycles. They next applied the polymer coating to cathodes made from other metals, creating lithium-molybdenum and lithium-vanadium batteries. These cells also had stable capacity over 300 charge-discharge cycles. Overall, the results indicate that coated cathodes could produce not only safer Li-S batteries with long lifespans, but also efficient batteries with other metal sulfides, according to Wang’s team.

The authors acknowledge funding from the National Natural Science Foundation of China; the Natural Science Foundation of Sichuan, China; and the Beijing National Laboratory for Condensed Matter Physics.



Source link

Continue Reading

Trending