DJI has announced the Air 3S, an update to its existing dual-camera Air 3 model that upgrades the primary camera to a larger Type 1 sensor and adds features that promise to make the drone easier to operate at night. DJI is positioning the Air 3S as “perfect for travel photography.”

The main camera on the Air 3S gains a 50MP Type 1 (13.2 x 8.8mm) CMOS sensor and features a 24mm equiv. F1.8 lens. That’s an upgrade from its predecessor, which utilized a smaller Type 1/1.3 (4.8 x 3.6mm) CMOS sensor with a marginally faster F1.7 lens. The telephoto camera remains unchanged between the two models, using a 48MP Type 1/1.3 sensor and featuring a 70mm equiv. F2.8 lens.

In addition to stills, both cameras can capture up to 4K/120p or 4K/60p when shooting HDR. All video can be captured in 10-bit, even in regular color mode, and D-Log M and HLG modes are available. The maximum ISO has been raised to 12,800 (3200 when shooting D-Log M). However, DJI says the Air 3S includes a new, more advanced video encoding algorithm that reduces video file size by over 30% without compromising image quality.

DJI claims both cameras can capture up to 14 stops of dynamic range and says the new main camera should capture even more detail than the camera on its more expensive Mavic 3 Pro model.

The DJI Air 3S is similar to its predecessor, the Air 3, but it gains a larger Type 1 (13.2 x 8.8mm) CMOS sensor on its main camera. Image: DJI

Beyond the cameras, DJI has added several appealing features to the Air 3S:

A new Free Panorama mode enables users to create panoramic shots by stitching together images across a manually selected subject area. This works with either camera, but DJI suggests the best results will come from using the telephoto camera, which reduces distortion.

The Air 3S also includes features designed to make it easier and safer to fly at night, including Nightscape Obstacle Sensing, with the Air 3S becoming the first DJI drone to feature forward-facing LiDAR. Additionally, the drone includes downward-facing infrared sensors and six vision sensors (two each at the front, rear and bottom). According to DJI, this combination of sensors provides the Air 3S with “nightscape omnidirectional obstacle sensing,” which should allow the drone to automatically identify and navigate around obstacles for safer nighttime photography.

This technology also enables DJI’s next-gen Smart RTH (return-to-home) feature, intended to allow the drone to return safely to its takeoff location, even at night.

The Air 3S is available with either DJI’s RC-N3 controller, which requires a smartphone to monitor the camera feed and aircraft status, or the RC 2 controller (above), which includes a built-in 700-nit 5.5″ 1080 screen. Image: DJI

The Air 3S also includes real-time vision positioning and map construction technology, designed to allow the drone to memorize a flight path and to return safely when adequate light is available, even in areas without satellite coverage.

The new model also features DJI’s ActiveTrack 360 subject tracking but introduces a new subject focusing feature designed to keep a subject in sharp focus, even during manual flight or when a subject moves off-center. This should allow a pilot to focus on creative decisions like composition or camera movement while ActiveTrack keeps the subject in focus.

There are a few hardware specs worth noting as well. The Air 3S weighs 724g (1.6 lbs), just 4g more than its predecessor, and is rated for 45 minutes of flight time. It includes DJI’s O4 video transmission system that transmits 10-bit video at up to 1080/60p and 42GB of built-in storage. A new Off-state Quick Transfer feature allows files to be transferred from the drone to a smartphone or a computer even when powered off.

Finally, for the privacy-conscious, a new Local Data mode completely disconnects the drone from the internet, ensuring that all data stays only on the device. DJI likens this mode to airplane mode on a smartphone.

The Air 3S is available in several packages. The Fly More combo shown above includes the RC 2 controller, ND filter set, two additional batteries (for a total of three), a charging hub, extra props and a shoulder bag, will retail for $1599. Image: DJI

The charging hub that ships with the Air 3S supports PD fast charging and features a power accumulation function. It allows users to transfer the remaining power from several depleted batteries into the battery with the most remaining power – something anyone who has had to use drones in remote locations without a charging station is likely to appreciate.

Price and availability

The DJI Air 3S is available for purchase in several configurations: the drone with the RC-N3 controller, which requires a smartphone to monitor the camera feed and flight status, will retail for $1099. A Fly More combo with the RC-N3 controller, ND filter set, two additional batteries, a battery charging hub and shoulder back will retail for $1399. Finally, a Fly More combo with DJI’s RC 2 controller, which includes a built-in 700-nit 5.5″ 1080p screen, ND filter set, two additional batteries, charging hub and shoulder pack, will retail for $1599.

Source link

Canon has announced plans to introduce new lenses to its hybrid RF-L series on October 30. No additional details were provided.

However, a teaser photo released with the announcement offers some hints. It shows five lenses, including the two previously announced RF L-series lenses: the RF 24-105mm F2.8 L IS USM Z, a fast wide to moderate telephoto zoom, and the RF 35mm F1.4 L VCM prime lens. The implication is that we can expect to see three new lenses, possibly a zoom and a couple of smaller primes.

The RF 24-105mm F2.8 L IS USM Z was the first lens in Canon’s RF L series of hybrid lenses. Unlike any EF or RF lens before it, it includes a manual aperture ring. Image: Canon

According to Canon, its RF L-series of lenses are designed to meet the needs of both still photographers and video shooters, borrowing design elements from both its existing RF lenses as well as technology from the company’s broadcast and cinema lenses.

Previously announced RF L lenses include manual aperture rings, something that hadn’t previously appeared on Canon EF or RF lenses, and include support for stepless aperture control, a feature desired by filmmakers. The lenses are also designed to minimize focus breathing.

We’ll hold our breath until Canon provides more details at the end of the month.

Source link

DXO has announced ViewPoint 5, a new version of its geometry correction and editing software that’s meant to help correct optical distortion or adjust perspective for artistic effect. Most of the changes revolve around the ReShape Fusion control introduced in the previous version, giving users more options when adjusting perspective or geometry in their images.

In ViewPoint 4, the ReShape Fusion tool let you manually drag points in a mesh to adjust a photo’s geometry. The new version adds a free transform mode, which lets you move, rotate, or scale certain parts of your image. It also now has a ‘propagation’ slider, which is somewhat analogous to the feather tool in other editing software; it lets you control how much your edits in one area of the image affect other parts of the image.

The propagation tool lets you choose how much you want your edits to affect other parts of your image. Image: DXO

DXO has also added a “Sticky Borders” checkbox, which ‘maintains the original crop of the image’ by warping your image to fill in spaces left by your other adjustments.

The horizon and perspective editing tools have also been updated to let you make adjustments locally, so they only apply to specific subjects in the image rather than the entire thing. For example, if you had an image with several skyscrapers in it and the ones at the edge of the frame were starting to lean away from the center, you could correct that distortion without affecting the other towers in the image.

That local correction is also now available for volume deformation correction, which helps fix the stretched edges of images taken with ultra-wide lenses. That means that if one edge of your image is stretched more than the other, you no longer have to apply the correction to fix it to the entire image.

Volume deformation adjustments can now be made to only certain parts of the image and can be adjusted using the same propagation slider control available on other tools. Image: DXO

Like DXO’s other software, ViewPoint 5 is being sold as a perpetual license instead of using a subscription model. Buying it standalone will cost $109, and upgrading from version 3 or 4 will cost $69. It’s also available as a bundle with the company’s recently announced PhotoLab 8 Raw editing software for $269. Like with the previous version, owning both will give you access to some of ViewPoint’s features within PhotoLab.

Source link