Connect with us

Camera

Panasonic to add Raw video output to G9 II

Published

on

Panasonic to add Raw video output to G9 II


The Panasonic Lumix DC-G9 II will gain the ability to output ‘raw’ video to popular external video recorders over its HDMI port.Photo: Brendan Nystedt

Panasonic has announced it will add ‘raw’ video output to the Lumix DC-G9 II in a forthcoming firmware update.

This addition brings the G9 II’s video spec closer into line with those of the GH6. Support is provided so that the Raw stream can be encoded as BRaw by BlackMagic 12G HDR external recorders or ProRes Raw by various Atomos Ninja and Shogun recorders.


Pre-order now:


The latest recorders from both brands will be able to capture 5.7K (1.89:1), DCI 4K, or the camera’s two 4:3 modes, designed for Anamorphic shooting. Older Ninja, Ninja V and Shogun recorders won’t be able to record all these modes, but the details of these restrictions are not yet available from Panasonic’s website.

Firmware v2.0 will be available at an unspecified future date.

Firmware Version 2.0 for LUMIX G9II To Support HDMI RAW Data output for BRAW and Pro Res RAW recording.

Newark, NJ (December 4th, 2023) 

Today, Panasonic announced the upcoming release of the Ver.2.0 firmware update program for the LUMIX G9II to offer more flexible workflow. The firmware program will be available on the LUMIX Global Customer Support website.

LUMIX G9II Firmware Version 2.0

*Details are still under development and subject to change.

RAW video output over HDMI to Blackmagic Design external recorder

[5.7K] / [C4K] / [5.8K(4:3)] / [4.4K(4:3)] 12-bit RAW video data can be output over HDMI to Blackmagic Video Assist 5″ 12G HDR and Blackmagic Video Assist 7″ 12G HDR, to be recorded as Blackmagic RAW.

*DaVinci Resolve or DaVinci Resolve Studio is required to play back and DaVinci Resolve Studio to edit Blackmagic RAW data.
*Please refer to the Blackmagic Design website for information on the corresponding firmware version of Blackmagic Video Assist 5″ 12G HDR and Blackmagic Video Assist 7″ 12G HDR.
*All functions may not be available depending on the situation.
*When recording in C4K 120p/100p or 5.7K 60p/50p, constant bitrate 5:1 or less is recommended for SSD recording and 8:1 or less for SD card recording.

RAW video output over HDMI to ATOMOS external recorder

[5.7K] / [C4K] / [5.8K(4:3)] / [4.4K(4:3)] 12-bit RAW video data can be output over HDMI to ATOMOS “Ninja V” “Ninja V+” “Ninja” “Ninja Ultra” “Shogun” “Shogun Ultra” “Shogun Connect” devices, to be recorded as Apple Pro Res RAW.

*All functions may not be available depending on the situation.
*Please check here for compatible firmware versions of external recorders.
https://panasonic.jp/support/global/cs/dsc/connect/index.html
*“Ninja V” “Ninja” “Shogun” does not support some RAW video data.
*Software that supports Apple ProRes RAW is required to edit RAW video recorded.
*A LUT (Lookup table) exclusively designed for RAW video is available on the following customer support website to make the same color grading as V-Log/V-Gamut.
https://panasonic.jp/support/global/cs/dsc/download/lut/s1h_raw_lut/



Source link

Continue Reading
Click to comment

Leave a Reply

Camera

Pentax K-1 and K-1 II firmware updates include astrophotography features (depending on where you live)

Published

on

By

Pentax K-1 and K-1 II firmware updates include astrophotography features (depending on where you live)


When you use DPReview links to buy products, the site may earn a commission.

Yesterday, Ricoh quietly released firmware 2.50 for its Pentax K-1 and K-1 II DSLRs. However, the features you can expect to gain from this update may depend on your geography.

Ricoh’s English-language firmware pages for the K-1 and K-1 II state that firmware 2.50 delivers “Improved stability for general performance.”

However, astute Pentax users noted that Ricoh’s Japanese-language firmware pages (translation) indicate that the update also includes a limited feature called “Astronomical Photo Assist,” a collection of three new features designed for astrophotography: Star AF, remote control focus fine adjustment, and astronomical image processing.

Star AF is intended to automate focusing on stars when using autofocus lenses. Rather than manually focusing on a bright star and changing your composition, it promises to let you compose your shot and let the camera focus.

Remote control fine adjustment allows users to adjust focus without touching the lens and requires Pentax’s optional O-RC1 remote. Astronomical image processing will enable users to make in-camera adjustments to astrophotography images, including shading correction, fogging correction, background darkness, star brightness, celestial clarity, and fringe correction.

Astronomical image processing on the K-1 and K-1 II will enable users to make in-camera adjustments to astrophotography images, including shading correction, fogging correction, background darkness, star brightness, celestial clarity, and fringe correction.

According to Ricoh, Astronomical Photo Assist is a premium feature that must be purchased and costs ¥11,000 for an activation key (about $70 at current exchange rates).

Although these astrophotography features appear to be Japan-only for now, a Ricoh representative tells us, “Ricoh Imaging Americas confirmed that the premium firmware features for the PENTAX K-1 and PENTAX K-1 Mark II will eventually be available to US customers.”

Firmware update 2.50 for both the K-1 and K-1 II is available for download from Ricoh’s website.



Source link

Continue Reading

Camera

On this day 2017: Nikon launches D850

Published

on

By

On this day 2017: Nikon launches D850


When you use DPReview links to buy products, the site may earn a commission.

As part of our twenty fifth anniversary, we’re looking back at some of the most significant cameras launched and reviewed during that period. Today’s pick was launched seven years ago today* and yet we’re only quite recently stepping out of its shadow.

The Nikon D850 is likely to be remembered as the high watermark of DSLR technology. We may yet still see impressive developments from Ricoh in the future (we’d love to see a significantly upgraded Pentax K-1 III), but the D850 was perhaps the green flash as the sun set on the DSLR as the dominant technology in the market.

Click here to read our Nikon D850 review

Why do we think it was such a big deal? Because it got just about everything right. Its 45MP sensor brought dual conversion gain to high pixel count sensors, meaning excellent dynamic range at base ISO and lower noise at high ISOs. Its autofocus system was one of the best we’ve ever seen on a DSLR: easy to use and highly dependable, with a good level of coverage. And then there was a body and user interface honed by years of iterative refinement, that made it easy to get the most out of the camera.

None of this is meant as a slight towards the other late-period DSLRs but the likes of Canon’s EOS 5DS and 5DSR didn’t present quite such a complete package of AF tracking, daylight DR and low-light quality as the Nikon did. With its ability to shoot at up to 9fps (if you used the optional battery grip), the D850 started to chip away at the idea that high megapixel cameras were specialized landscape and studio tools that would struggle with movement or less-than-perfect lighting. And that’s without even considering its 4K video capabilities.

In the seven years since the D850 was launched, mirrorless cameras have eclipsed most areas in which DSLRs once held the advantage. For example, the Z8 can shoot faster, autofocus more with more accuracy and precision, across a wider area of the frame and do so while shooting at much faster rates.

But, even though it outshines the D850 in most regards, the Z8 is still based around what we believe is a (significant) evolution of the same sensor, and its reputation still looms large enough for Nikon to explicitly market the Z8 as its “true successor.”

Nikon D850 sample gallery

Sample gallery
This widget is not optimized for RSS feed readers. Click here to open it in a new browser window / tab.

*Actually seven years ago yesterday: we had to delay this article for a day to focus on the publishing the Z6III studio scene: the latest cameras taking precedence over our anniversary content.



Source link

Continue Reading

Camera

Nikon Z6III added to studio scene, making image quality clear

Published

on

By

Nikon Z6III added to studio scene, making image quality clear


When you use DPReview links to buy products, the site may earn a commission.
Photo: Richard Butler

We’ve just received a production Nikon Z6III and took it into our studio immediately to get a sense for how the sensor really performs.

Dynamic range tests have already been conducted, but these only give a limited insight into the image quality as a whole. As expected, our Exposure Latitude test – which mimics the effect of reducing exposure to capture a bright sunrise or sunset, then making use of the deep shadows – shows a difference if you use the very deepest shadows, just as the numerical DR tests imply.

Likewise, our ISO Invariance test shows there’s more of a benefit to be had from applying more amplification by raising the ISO setting to overcome the read noise, than there was in the Z6 II. This means there’s a bigger improvement when you move up to the higher gain step of the dual conversion gain sensor but, as with the Z6 II, little more to be gained beyond that.

These are pushing at the extreme of the sensor’s performance though. For most everyday photography, you don’t use the deepest shadows of the Raw files, so differences in read noise between sensors don’t play much of a role. In most of the tones of an image, sensor size plays a huge role, along with any (pretty rare) differences in light capturing efficiency.

Image Comparison
This widget is not optimized for RSS feed readers. Click here to open it in a new browser window / tab.

As expected, the standard exposures look identical to those of the Z6 II. There are similar (or better) levels of detail at low ISO, in both JPEG and Raw. At higher ISO, the Z6III still looks essentially the same as the Z6II. Its fractionally higher level of read noise finally comes back to have an impact at very, very high ISO settings.

Overall, then, there is a read noise price to be paid for the camera’s faster sensor, in a way that slightly blunts the ultimate flexibility of the Raw files at low ISO and that results in fractionally more noise at ultra-high ISOs. But we suspect most people will more than happily pay this small price in return for a big boost in performance.



Source link

Continue Reading

Trending