Solar Energy

Reflectors in space could make solar farms on Earth work for longer every day

Published

6 months ago

February 6, 2024

sarosh

Reflectors in space could make solar farms on Earth work for longer every day

by Onur Celik | Space Technology, University of Glasgow

Glasgow UK (SPX) Feb 06, 2024

If you happened to be looking at the sky in Europe on a cold night on February 5 1993, there is a chance you could have seen a dim flash of light. That flash came from a Russian space mirror experiment called Znamya-2.

Znamya-2 was a 20-metre reflective structure much like aluminium foil (Znamya means “banner” in Russian), unfurled from a spacecraft which had just undocked from the Russian Mir space station. Its goal was to demonstrate solar energy could be reflected from space to Earth.

This was the first and only time that a mirror had ever been launched into space for that purpose. But, three decades on, colleagues and I believe it’s time to revisit this technology.

Unlike proposals to build solar power stations in space and transmit energy down to earth, all the generation would still happen down here. Crucially, these reflectors could help solar farms generate electricity even when direct sunlight is not available, especially during evening and early morning hours when demand for clean energy is greatest. Colleagues and I call this concept “orbiting solar reflectors”.

Pioneering rocket scientist Hermann Oberth recognised the potential all the way back in 1929, when he envisaged reflectors in space relaying sunlight to illuminate large cities and ship routes. He predicted that these reflectors would be very large, thin and ultralightweight, and built in space by astronauts wearing diving suits.

Colleagues and I recently published a paper in which we explored the possibility of orbiting solar reflectors in the near term. We think Oberth’s vision may now be achievable thanks to up-and-coming technologies such as robotic spacecraft that can manufacture and assemble structures in space. The reflectors and other materials necessary to build such large structures could be launched by modern rockets such as SpaceX’s colossal Starship.

Each time a reflector passes over a solar power farm, it could angle itself to illuminate the solar farm and its immediate surroundings. Each “pass” would extend the “day” of the solar farm and hence its hours of electricity generation.

When the reflector can no longer illuminate the solar farm, it can be rotated such that it is edge-on to the Sun and no light is reflected to the ground. For this reason, we expect the potential disturbance to ground-based astronomical observations would be minimal.

Illuminate a 10km area

With the reflectors orbiting 900km above us – about twice the altitude of the International Space Station – we estimate that the illuminated area on the Earth would be approximately 10km across when at its brightest. Therefore, a system like this would not be aimed at individual rooftop solar panels but large solar power farms, typically located away from inhabited areas.

Each pass would extend energy generation by about 15 to 20 minutes around the dawn or dusk hours. This is important because those hours are when electricity demand is the highest and often exceeds the amount being generated by wind and solar, meaning coal and gas power plants are used to compensate. Reflectors may therefore help abate fossil fuel use without needing to store energy during the day.

These reflectors would be high enough to service multiple solar farms on the same orbit. Their orbits could even be used to inform where to build new solar farms in especially sunny regions.

Our proposal uses hexagonal reflectors with sides 250 metres long. Each weighs about 3 tonnes. It would currently cost a few thousand US dollars per kilogram to launch something like this into space, though costs are on a downward trend. If costs are reduced to a few hundred US dollars per kilo, then we would expect orbiting reflectors to be viable within a few years.

We expect these reflectors to operate for 20 to 30 years, though the carbon footprint of a system such as this is hard to estimate since spacecraft generally take a long time to design, build and operate. Further research will be needed to produce a full lifecycle assessment, but in the long run, we expect the reflectors would help generate enough clean energy to outweigh their carbon footprint.

No more nighttime?

Three days after the news of the Znamya-2 experiment was published in the New York Times, a reader wrote to the editor wondering whether we would give up our nights. The short answer is no.

Even at its brightest, we estimate that the illumination levels would last only a few minutes per reflector and not exceed an overcast day level. This means that, unless you are very close to the solar power farm, the illumination may not even be noticeable most of the time, especially at dawn/dusk times when the sky is already quite bright compared to nighttime.

We also estimate that the reflector itself would not be visible to the naked eye unless you are close to the solar farm. These estimations suggest that the impact of these reflectors on the natural environment around the solar power farm may also be minimal, though more research is necessary.

When the reflectors are old or no longer needed, they could “sail” on sunlight into less-congested higher orbits or into a lower orbit to burn up safely.

Orbiting solar reflectors are still some way off. But they represent a way to connect the space and energy sectors to help accelerate the transition towards clean energy and tackle climate change.

Source link

Solar Energy

3D-printed microstructure forest enhances solar steam desalination

Published

2 days ago

July 24, 2024

sarosh

3D-printed microstructure forest enhances solar steam desalination

by Clarence Oxford

Los Angeles CA (SPX) Jul 24, 2024

To address the global freshwater scarcity issue, researchers in Singapore have developed advanced solar steam generators (SSGs) for seawater desalination. This method, powered by renewable energy, mimics the natural water cycle by using solar energy to evaporate and purify water, offering a potentially cost-effective solution compared to traditional, energy-intensive desalination techniques. However, current SSG technologies face limitations due to the complexity of fabricating designs that maximize surface area for optimal water evaporation.

Drawing inspiration from nature, the team utilized 3D printing to create innovative SSGs. Their findings, published in Applied Physics Reviews, highlight a novel technique for manufacturing efficient SSGs and introduce a groundbreaking method for printing functional nanocomposites using multi-jet fusion (MJF).

“We created SSGs with exceptional photothermal performance and self-cleaning properties,” said Kun Zhou, a professor of mechanical engineering at Nanyang Technological University. “Using a treelike porous structure significantly enhances water evaporation rates and ensures continuous operation by preventing salt accumulation – its performance remains relatively stable even after prolonged testing.”

The technology works by converting light to thermal energy, where SSGs absorb solar energy and convert it to heat to evaporate water. The porous structure of the SSGs aids in self-cleaning by removing accumulated salt, ensuring sustained desalination performance.

“By using an effective photothermal fusing agent, MJF printing technology can rapidly create parts with intricate designs,” Zhou added. “To improve the photothermal conversion efficiency of fusing agents and printed parts, we developed a novel type of fusing agent derived from metal-organic frameworks.”

The SSGs feature miniature tree-shaped microstructures that mimic plant transpiration, forming an efficient, heat-distributing forest.

“Our bioinspired design increases the surface area of the SSG,” Zhou explained. “Using a treelike design increases the surface area of the SSG, which enhances the water transport and boosts evaporation efficiency.”

In both simulated environments and field trials, the SSGs exhibited a high rate of water evaporation. The desalinated water consistently met drinking water standards, even after extended testing.

“This demonstrates the practicality and efficiency of our approach,” Zhou said. “And it can be quickly and easily mass-produced via MJF commercial printers.”

The team’s work shows significant potential for tackling freshwater scarcity.

“Our SSGs can be used in regions with limited access to freshwater to provide a sustainable and efficient desalination solution,” said Zhou. “Beyond desalination, it can be adapted for other applications that require efficient solar energy conversion and water purification.”

Research Report:3D printing of bio-inspired porous polymeric solar steam generators for efficient and sustainable desalination

Source link

Solar Energy

Renewables overproduction turns electricity prices negative

Published

2 days ago

July 24, 2024

sarosh

Renewables overproduction turns electricity prices negative

By Nathalie Alonso and Catherine Hours

Paris (AFP) July 24, 2024

With the proliferation of solar panels and wind turbines an unusual phenomenon is becoming more and more frequent: wholesale electricity prices turn negative.

While that may brighten the mood of consumers whose power bills have surged in recent years, it could undermine the further development of renewables, a key element in the fight against global warming.

The increasingly frequent phenomenon is “extremely problematic” for the wind and solar sector, said Mattias Vandenbulcke, strategy director of the renewables industry group France Renouvelables.

“It allows some to have harmful, even dangerous rhetoric which says ‘renewables are useless’,” Vandenbulcke said.

In southern Australia, wholesale electricity prices have been negative some 20 percent of the time since last year, according to the International Energy Agency.

The share of negatively priced hours in southern California was above 20 percent in the first half of the year, more than triple from the same period in 2023, the IEA said.

In the first six months of the year in France, there were negative prices around five percent of the time, beating the record set last year, according to the electricity grid operator RTE.

In Switzerland the price tumbled as far as -400 euros (-$436) per megawatt hour on July 14. The lowest prices are usually recorded around midday during the summer when solar production is at its peak.

– ‘A warning signal’ –

The trend has been accelerating for the past three years as demand in Europe has unexpectedly dropped since the Covid pandemic and the war in Ukraine.

Prices turn negative on the spot wholesale electricity market when production is strong while demand is weak.

Around a fifth of the total is traded on this market, where electricity is bought for the following day.

Negative prices help reduce the bills of consumers, said Rebecca Aron, head of electricity markets at French renewables firm Valorem, but the impact is delayed and difficult to discern among the other factors that send prices higher and lower.

Large, industrial consumers that can shift production to times when prices are negative and buy on wholesale markets can reap the biggest rewards.

Negative prices are “a warning signal that there is way too much production on the electrical grid”, said energy analyst Nicolas Goldberg at Colombus Consulting.

Electricity grids need to be kept constantly in balance. Too much can lead to the electricity to increase in frequency beyond norms for some equipment. Too little can lead to some or all customers losing power.

There are currently few options to stock surplus electricity production so producers have to reduce output.

Many renewable producers stop their output when prices are set to turn negative. It takes one minute to stop output at a solar park, two to three minutes for a wind turbine.

But not all stop their production.

– Tripling renewables –

“Renewable energy can be controlled, but depending on production contracts, there might not necessarily be an incentive to stop,” said Mathieu Pierzo at French grid operator RTE, which has the responsibility for balancing the electricity load.

Some producers are paid a fixed price under their contract or are compensated by the state if prices fall below a certain level.

Fossil fuel and nuclear power plants can adjust their production to some extent, but halting and restarting output is costly.

In the future, solar and wind will also have to “participate more in balancing the electricity system”, Pierzo said.

Solar and wind production is set to rise further as nations agreed at the COP28 climate conference last year to triple renewable energy capacity by 2030 as part of efforts to limit warming to 1.5 degrees Celsius compared with pre-industrial levels.

“Rising frequency of negative prices sends an urgent signal that greater flexibility of supply and demand is needed,” the Paris-based IEA warned last week.

“The appropriate regulatory frameworks and market designs will be important to allow for an uptake in flexibility solutions such as demand response and storage,” it said.

nal-cho/abb/rl-lth/

FOSSIL GROUP

Source link

Solar Energy

NREL explores long-term strategies for sustainable perovskite solar panels

Published

3 days ago

July 24, 2024

sarosh

NREL explores long-term strategies for sustainable perovskite solar panels

by Clarence Oxford

Los Angeles CA (SPX) Jul 24, 2024

Researchers at the National Renewable Energy Laboratory (NREL) are examining the future of perovskite solar panels, focusing on scaling, deploying, and designing panels to be recyclable.

Perovskite solar panels could play a key role in global efforts to reduce greenhouse gas emissions. With the technology still in its developmental stages, researchers are emphasizing the importance of designing these panels to minimize environmental impact.

“When you have a technology in its very early stages, you have the ability to design it better. It’s a cleaner slate,” said Joey Luther, a senior research fellow at the U.S. Department of Energy’s (DOE’s) National Renewable Energy Laboratory (NREL) and coauthor of the newly published article in the journal Nature Materials. “Pushing perovskite PV toward enhanced sustainability makes more sense at this stage. We’re thinking about how we can make sure we have a sustainable product now rather than dealing with sustainability issues toward the end of its practical life.”

The article highlights the PV research community’s influential position to prioritize remanufacturing, recycling, and reliability efforts, aiming to make perovskite PV one of the most sustainable energy sources available.

“Perovskites could unlock the next evolution of high-efficiency PV, and it is our responsibility to assure they are manufactured, used, and recycled sustainably,” said the lead author of the study, Kevin Prince, a former graduate researcher at NREL who now researches perovskites at Helmholtz Zentrum Berlin in Germany.

While silicon solar panels dominate the industry and cadmium telluride (CdTe) panels have established recycling programs, perovskites are at a critical point where sustainability issues can be addressed from the start.

The most effective circular economy begins at the design stage, considering materials sourcing, product lifetime, and end-of-life management. Researchers suggest assessing environmental impacts by looking at carbon emissions during production, embodied energy, sustainable material sourcing, and module circularity.

The journal article identifies critical sustainability concerns for each component of a perovskite solar panel. For instance, lead can be diluted with metals like tin to reduce lead content, though this may affect PV efficiency and durability. Expensive precious metals such as silver and gold could be replaced with cheaper alternatives like aluminum, copper, or nickel. Fluorine-tin oxide is recommended over the scarcer indium-tin oxide for front electrodes.

“We want to have the lowest amount of embodied energy in the fabrication,” Luther said. “We want to have the lowest amount of emissions in the fabrication. At this stage, now is the chance to look at those components. I don’t think we have to change anything. It’s more a matter of what decisions should be made, and these arguments should certainly be discussed.”

The authors discuss various ways to improve the circularity of perovskite panels. Remanufacturing involves reusing parts from old modules to make new ones, while recycling converts waste materials into raw materials for reuse. Attention is needed for the specialized glass used in perovskite modules, which is crucial for structural support and protection while allowing maximum sunlight penetration. Establishing a recycling pathway for this glass will be essential as PV deployment increases.

Silvana Ovaitt, a PV researcher and coauthor of the paper, noted that cleaner electricity grids will lead to cleaner manufacturing processes, further reducing emissions.

“Another concern is the transportation of the final modules and the raw glass because those are the heaviest items,” Ovaitt said. “Local manufacturing will be a great way to reduce those carbon impacts.”

The researchers explain that increasing the durability of PV modules, thereby extending their useful life, is a more effective approach to reducing net energy, energy payback, and carbon emissions than designing for circularity alone. A longer lifespan means panels won’t need to be recycled as often.

“Ultimately, we want to make them as durable as possible,” Luther said. “But we also want to consider the aspects of whenever that time does come. We want to be deliberate about how to take them apart and to reuse the critical components.”

Research Report:Sustainability pathways for perovskite photovoltaics