Solar Energy

Squeezing a rock-star material could make it stable enough for solar cells

Published

4 years ago

February 8, 2021

sarosh

Squeezing a rock-star material could make it stable enough for solar cells

Among the materials known as perovskites, one of the most exciting is a material that can convert sunlight to electricity as efficiently as today’s commercial silicon solar cells and has the potential for being much cheaper and easier to manufacture.

There’s just one problem: Of the four possible atomic configurations, or phases, this material can take, three are efficient but unstable at room temperature and in ordinary environments, and they quickly revert to the fourth phase, which is completely useless for solar applications.

Now scientists at Stanford University and the Department of Energy’s SLAC National Accelerator Laboratory have found a novel solution: Simply place the useless version of the material in a diamond anvil cell and squeeze it at high temperature. This treatment nudges its atomic structure into an efficient configuration and keeps it that way, even at room temperature and in relatively moist air.

“This is the first study to use pressure to control this stability, and it really opens up a lot of possibilities,” said Yu Lin, a SLAC staff scientist and investigator with the Stanford Institute for Materials and Energy Sciences (SIMES).

“Now that we’ve found this optimal way to prepare the material,” she said, “there’s potential for scaling it up for industrial production, and for using this same approach to manipulate other perovskite phases.”

A search for stability

Perovskites get their name from a natural mineral with the same atomic structure. In this case the scientists studied a lead halide perovskite that’s a combination of iodine, lead and cesium.

One phase of this material, known as the yellow phase, does not have a true perovskite structure and can’t be used in solar cells. However, scientists discovered a while back that if you process it in certain ways, it changes to a black perovskite phase that’s extremely efficient at converting sunlight to electricity. “This has made it highly sought after and the focus of a lot of research,” said Stanford Professor and study co-author Wendy Mao.

Unfortunately, these black phases are also structurally unstable and tend to quickly slump back into the useless configuration. Plus, they only operate with high efficiency at high temperatures, Mao said, and researchers will have to overcome both of those problems before they can be used in practical devices.

There had been previous attempts to stabilize the black phases with chemistry, strain or temperature, but only in a moisture-free environment that doesn’t reflect the real-world conditions that solar cells operate in. This study combined both pressure and temperature in a more realistic working environment.

Pressure and heat do the trick

Working with colleagues in the Stanford research groups of Mao and Professor Hemamala Karunadasa, Lin and postdoctoral researcher Feng Ke designed a setup where yellow phase crystals were squeezed between the tips of diamonds in what’s known as a diamond anvil cell. With the pressure still on, the crystals were heated to 450 degrees Celsius and then cooled down.

Under the right combination of pressure and temperature, the crystals turned from yellow to black and stayed in the black phase after the pressure was released, the scientists said. They were resistant to deterioration from moist air and remained stable and efficient at room temperature for 10 to 30 days or more.

Examination with X-rays and other techniques confirmed the shift in the material’s crystal structure, and calculations by SIMES theorists Chunjing Jia and Thomas Devereaux provided insight into how the pressure changed the structure and preserved the black phase.

The pressure needed to turn the crystals black and keep them that way was roughly 1,000 to 6,000 times atmospheric pressure, Lin said – about a tenth of the pressures routinely used in the synthetic diamond industry. So one of the goals for further research will be to transfer what the researchers have learned from their diamond anvil cell experiments to industry and scale up the process to bring it within the realm of manufacturing.

The researchers described their results in Nature Communications.

Source link

Solar Energy

More energy and oil possible through combining photovoltaic plants with hedgerow olive groves

Published

2 days ago

November 20, 2024

sarosh

More energy and oil possible through combining photovoltaic plants with hedgerow olive groves

by Hugo Ritmico

Madrid, Spain (SPX) Nov 20, 2024

The integration of photovoltaic plants on agricultural land has long sparked debate over balancing energy production with crop cultivation. Now, the innovative approach of combining both has gained momentum with promising results. This “agrivoltaic” system, which involves placing solar panels within agricultural setups, has been examined by a University of Cordoba research team to see if solar energy and agricultural production could mutually enhance each other.

The research group, including Marta Varo Martinez, Luis Manuel Fernandez de Ahumada, and Rafael Lopez Luque from the Physics for Renewable Energies and Resources group, along with Alvaro Lopez Bernal and Francisco Villalobos from the Soil-Water-Plant Relations group, developed a model that simulates an agrivoltaic system in hedgerow olive plantations. This simulation model combined predictions for oil yield from olive hedgerows and energy generation from solar collectors to assess combined productivity. The study concluded that using both in tandem increased overall productivity, marking a potential shift in land-use strategy that could cater to the needs for both clean energy and food.

The key findings show that mutual benefits arise when solar panels provide shade, acting as windbreaks that don’t compete for water, enhancing agricultural production. Meanwhile, the cooling effect from plant evapotranspiration can improve the efficiency of solar collectors by reducing their temperature, boosting energy output.

This model allows researchers to experiment with various collector configurations, adjusting heights, widths, and spacing, to pinpoint the most effective designs. Despite generally positive outcomes, the team noted that overly dense arrangements might limit space for machinery or complicate maintenance of the olive grove. The approach underscores the importance of balancing land-use density and operational accessibility.

Research Report:Simulation model for electrical and agricultural productivity of an olive hedgerow Agrivoltaic system

Source link

Solar Energy

New initiative empowers Native American women with solar training

Published

2 days ago

November 20, 2024

sarosh

New initiative empowers Native American women with solar training

by Clarence Oxford

Los Angeles CA (SPX) Nov 20, 2024

Native American women across the country are gaining access to hands-on training in photovoltaic panel installation aimed at empowering them to establish solar systems in their communities and homes on tribal land.

Sandra Begay, an engineer at Sandia National Laboratories and a Navajo Nation member, is one of four mentors guiding this effort.

This training initiative is part of a Cooperative Research and Development Agreement between Sandia and Red Cloud Renewable, a nonprofit organization in Pine Ridge, South Dakota, that focuses on advancing energy independence for tribal members and communities.

Known as the Bridging Renewable Industry Divides in Gender Equality, or BRIDGE, Program, the initiative provides a five-week immersive training experience that emphasizes practical skills in photovoltaic installation.

In August, Begay joined the first group of participants in South Dakota.

“Five weeks is a long time to be away from home,” Begay said. “I provided encouragement and reminded the women that they made the right choice to participate in this program. We also used the time to reflect on what they learned.”

Participants are taught the components of photovoltaic systems and how to install them safely and effectively.

Begay also provided insight into the energy challenges faced by tribal communities.

“There are more than 20,000 homes on the Navajo Nation and some rural homes on the Hopi reservation that don’t have electricity. These are off-grid homes,” Begay said, noting that many of these homes depend on diesel generators. “We’re looking at a clean energy future. We want to move away from those types of fuels and look at clean energy sources such as solar.”

She highlighted that large-scale solar projects are being developed by the Navajo Nation and the Mountain Ute Tribe in Colorado.

“This program will provide participants with new employment opportunities and a better understanding of where we’re headed with clean energy,” Begay said.

Red Cloud Renewable also supports the women with resume building, interview training, networking, and job placement services.

With over 30 years of experience championing renewable energy in Native American communities, Begay is committed to maintaining relationships with participants.

“I am making a long-term commitment to the women in the BRIDGE Program,” Begay said. “I will share any job openings I see with them and support them in their job searches.”

Teamwork for success

Begay emphasized the critical role teamwork plays in photovoltaic installations.

“Photovoltaic installation happens with a team of people. How do you work through that group dynamic? How do you work with each other as a team? Those questions are underemphasized in the work we do. They’re going to rely on each other when installing photovoltaic systems,” she said.

Alicia Hayden, Red Cloud Renewable’s communications manager, noted the strong bond formed among the participants.

“What stood out to me was the incredible camaraderie among the women,” Hayden said. “They were genuinely supportive of each other and grateful to be participating in this program alongside women who share similar backgrounds.”

Funded by the Department of Energy’s Solar Energy Technology Office, the project is set to continue over the next few years and aims to train two additional groups, eventually involving around 45 women.

“These women will be equipped to take on installer jobs within their own reservations, bringing valuable skills and opportunities for sustainable development to their people,” Hayden said.

Despite being highly underrepresented in the solar industry – comprising just 0.05% of the sector, according to Red Cloud Renewable – Native American women stand to gain from this initiative.

Begay expressed optimism about the impact of the BRIDGE Program.

“It’s very gratifying both professionally and personally to see where we can help women who are underrepresented in the workforce, let alone in a unique technology like photovoltaic installation,” Begay said. “We’re seeding ideas for the women that they would never have thought of doing. I think that’s what’s unique.”

Source link

Solar Energy

Perovskite advancements improve solar cell efficiency and longevity

Published

2 days ago

November 20, 2024

sarosh

Perovskite advancements improve solar cell efficiency and longevity

by Sophie Jenkins

London, UK (SPX) Nov 20, 2024

A global team led by the University of Surrey, in collaboration with Imperial College London, has pioneered a method to enhance the efficiency and durability of solar cells constructed from perovskite by addressing an unseen degradation pathway.

The University of Surrey’s Advanced Technology Institute (ATI) detailed their findings in ‘Energy and Environmental Science’, showing that by employing specific design strategies, they successfully created lead-tin perovskite solar cells achieving over 23% power conversion efficiency (PCE) – a significant result for this material type. Notably, these improvements also boosted the operational lifespan of these cells by 66%. PCE measures the proportion of sunlight converted to usable energy by a solar cell.

While traditional silicon solar panels are already widely used, advancements are steering towards perovskite/silicon hybrid panels, and fully perovskite-based panels promise even higher efficiencies. However, improving the stability and efficiency of lead-tin perovskite cells remains a significant hurdle. This research by the University of Surrey sheds light on mechanisms contributing to these limitations and offers a pathway to overcoming them, aiding in the broader advancement of solar technology.

Hashini Perera, Ph.D. student and lead author at ATI, stated: “The understanding we have developed from this work has allowed us to identify a strategy that improves the efficiency and extends the operational lifetime of these devices when exposed to ambient conditions. This advancement is a major step towards high efficiency, long-lasting solar panels which will give more people access to affordable clean energy while reducing the reliance on fossil fuels and global carbon emissions.”

The team focused on minimizing losses caused by the hole transport layer, crucial for solar cell functionality. By introducing an iodine-reducing agent, they mitigated the degradation effects, enhancing both the cell’s efficiency and its lifespan. This innovation paves the way for more sustainable and economically feasible solar technology.

Dr. Imalka Jayawardena from the University of Surrey’s ATI, co-author of the study, said: “By significantly enhancing the efficiency of our perovskite-based solar cells, we are moving closer to producing cheaper and more sustainable solar panels. We are already working on refining these materials, processes and the device architecture to tackle the remaining challenges.”

Professor Ravi Silva, Director of the ATI, added: “This research brings us closer to panels that not only generate more power over their lifetime but are also longer lasting. Greater efficiency and fewer replacements mean more green energy with less waste. The University of Surrey are in the process of building a 12.5MW solar farm, where we can test some of these modules. We’re confident that our innovative perovskite research will accelerate the widespread commercial adoption of perovskite-based solar panels.”

This progress aligns with the UN Sustainable Development Goals, specifically Goals 7 (affordable and clean energy), 9 (industry, innovation, and infrastructure), and 13 (climate action).

Research Report:23.2% efficient low band gap perovskite solar cells with cyanogen management