Connect with us

TOP SCEINCE

Bowtie resonators that build themselves bridge the gap between nanoscopic and macroscopic

Published

on

Bowtie resonators that build themselves bridge the gap between nanoscopic and macroscopic


A central goal in quantum optics and photonics is to increase the strength of the interaction between light and matter to produce, e.g., better photodetectors or quantum light sources. The best way to do that is to use optical resonators that store light for a long time, making it interact more strongly with matter. If the resonator is also very small, such that light is squeezed into a tiny region of space, the interaction is enhanced even further. The ideal resonator would store light for a long time in a region at the size of a single atom.

Physicists and engineers have struggled for decades with how small optical resonators can be made without making them very lossy, which is equivalent to asking how small you can make a semiconductor device. The semiconductor industry’s roadmap for the next 15 years predicts that the smallest possible width of a semiconductor structure will be no less than 8 nm, which is several tens of atoms wide.

The team behind a new paper in Nature, Associate Professor Søren Stobbe and his colleagues at DTU Electro demonstrated 8 nm cavities last year, but now they propose and demonstrate a novel approach to fabricate a self-assembling cavity with an air void at the scale of a few atoms. Their paper ‘Self-assembled photonic cavities with atomic-scale confinement’ detailing the results is published today in Nature.

To briefly explain the experiment, two halves of silicon structures are suspended on springs, although in the first step, the silicon device is firmly attached to a layer of glass. The devices are made by conventional semiconductor technology, so the two halves are a few tens of nanometers apart. Upon selective etching of the glass, the structure is released and now only suspended by the springs, and because the two halves are fabricated so close to each other, they attract due to surface forces. By carefully engineering the design of the silicon structures, the result is a self-assembled resonator with bowtie-shaped gaps at the atomic scale surrounded by silicon mirrors.

“We are far from a circuit that builds itself completely. But we have succeeded in converging two approaches that have been travelling along parallel tracks so far. And it allowed us to build a silicon resonator with unprecedented miniaturization,” says Søren Stobbe.

Two separate approaches

One approach — the top-down approach — is behind the spectacular development we have seen with silicon-based semiconductor technologies. Here, crudely put, you go from a silicon block and work on making nanostructures from them. The other approach — the bottom-up approach — is where you try to have a nanotechnological system assemble itself. It aims to mimic biological systems, such as plants or animals, built through biological or chemical processes. These two approaches are at the very core of what defines nanotechnology. But the problem is that these two approaches were so far disconnected: Semiconductors are scalable but cannot reach the atomic scale, and while self-assembled structures have long been operating at atomic scales, they offer no architecture for the interconnects to the external world.

“The interesting thing would be if we could produce an electronic circuit that built itself — just like what happens with humans as they grow but with inorganic semiconductor materials. That would be true hierarchical self-assembly. We use the new self-assembly concept for photonic resonators, which may be used in electronics, nanorobotics, sensors, quantum technologies, and much more. Then, we would really be able to harvest the full potential of nanotechnology. The research community is many breakthroughs away from realizing that vision, but I hope we have taken the first steps,” says Guillermo Arregui, who co-supervised the project.

Approaches converging

Supposing a combination of the two approaches is possible, the team at DTU Electro set out to create nanostructures that surpass the limits of conventional lithography and etching despite using nothing more than conventional lithography and etching. Their idea was to use two surface forces, namely the Casimir force for attracting the two halves and the van der Waals force for making them stick together. These two forces are rooted in the same underlying effect: quantum fluctuations (see Fact box).

The researchers made photonic cavities that confine photons to air gaps so small that determining their exact size was impossible, even with a transmission electron microscope. But the smallest they built are of a size of 1-3 silicon atoms.

“Even if the self-assembly takes care of reaching these extreme dimensions, the requirements for the nanofabrication are no less extreme. For example, structural imperfections are typically on the scale of several nanometers. Still, if there are defects at this scale, the two halves will only meet and touch at the three largest defects. We are really pushing the limits here, even though we make our devices in one of the very best university cleanrooms in the world,” says Ali Nawaz Babar, a PhD student at the NanoPhoton Center of Excellence at DTU Electro and first author of the new paper.

“The advantage of self-assembly is that you can make tiny things. You can build unique materials with amazing properties. But today, you can’t use it for anything you plug into a power outlet. You can’t connect it to the rest of the world. So, you need all the usual semiconductor technology for making the wires or waveguides to connect whatever you have self-assembled to the external world.”

Robust and accurate self-assembly

The paper shows a possible way to link the two nanotechnology approaches by employing a new generation of fabrication technology that combines the atomic dimensions enabled by self-assembly with the scalability of semiconductors fabricated with conventional methods.

“We don’t have to go in and find these cavities afterwards and insert them into another chip architecture. That would also be impossible because of the tiny size. In other words, we are building something on the scale of an atom already inserted in a macroscopic circuit. We are very excited about this new line of research, and plenty of work is ahead,” says Søren Stobbe.

Surface forces

There are four known fundamental forces: Gravitational, electromagnetic, and strong and weak nuclear forces. Besides the forces due to static configurations, e.g., the attractive electromagnetic force between positively and negatively charged particles, there can also be forces due to fluctuations. Such fluctuations may be either thermal or quantum in origin, and they give rise to surface forces such as the van der Waals force and the Casimir force which act at different length scales but are rooted in the same underlying physics. Other mechanisms, such as electrostatic surface charges, can add to the net surface force. For example, geckos exploit surface forces to cling to walls and ceilings.

How it was done

The paper details three experiments that the researchers carried out in the labs at DTU:

  1. No fewer than 2688 devices across two microchips were fabricated, each containing a platform that would either collapse onto a nearby silicon wall — or not collapse, depending upon the surface area details, spring constant, and distance between platform and wall. This allowed the researchers to make a map of which parameters would — and would not — lead to deterministic self-assembly. Only 11 devices failed due to fabrication errors or other defects, a remarkably low number for a novel self-assembly process.
  2. The researchers made self-assembled optical resonators whose optical properties were verified experimentally, and the atomic scale was confirmed by transmission electron microscopy.
  3. The self-assembled cavities were embedded in a larger architecture consisting of self-assembled waveguides, springs, and photonic couplers to make the surrounding microchip circuitry in the same process.



Source link

Continue Reading
Click to comment

Leave a Reply

TOP SCEINCE

New drug shows promise in clearing HIV from brain

Published

on

By

Bowtie resonators that build themselves bridge the gap between nanoscopic and macroscopic


An experimental drug originally developed to treat cancer may help clear HIV from infected cells in the brain, according to a new Tulane University study.

For the first time, researchers at Tulane National Primate Research Center found that a cancer drug significantly reduced levels of SIV, the nonhuman primate equivalent of HIV, in the brain by targeting and depleting certain immune cells that harbor the virus.

Published in the journal Brain, this discovery marks a significant step toward eliminating HIV from hard-to-reach reservoirs where the virus evades otherwise effective treatment.

“This research is an important step in tackling brain-related issues caused by HIV, which still affect people even when they are on effective HIV medication,” said lead study author Woong-Ki Kim, PhD, associate director for research at Tulane National Primate Research Center. “By specifically targeting the infected cells in the brain, we may be able to clear the virus from these hidden areas, which has been a major challenge in HIV treatment.”

Antiretroviral therapy (ART) is an essential component of successful HIV treatment, maintaining the virus at undetectable levels in the blood and transforming HIV from a terminal illness into a manageable condition. However, ART does not completely eradicate HIV, necessitating lifelong treatment. The virus persists in “viral reservoirs” in the brain, liver, and lymph nodes, where it remains out of reach of ART.

The brain has been a particularly challenging area for treatment due to the blood-brain barrier — a protective membrane that shields it from harmful substances but also blocks treatments, allowing the virus to persist. In addition, cells in the brain known as macrophages are extremely long-lived, making them difficult to eradicate once they become infected.

Infection of macrophages is thought to contribute to neurocognitive dysfunction, experienced by nearly half of those living with HIV. Eradicating the virus from the brain is critical for comprehensive HIV treatment and could significantly improve the quality of life for those with HIV-related neurocognitive problems.

Researchers focused on macrophages, a type of white blood cell that harbors HIV in the brain. By using a small molecule inhibitor to block a receptor that increases in HIV-infected macrophages, the team successfully reduced the viral load in the brain. This approach essentially cleared the virus from brain tissue, providing a potential new treatment avenue for HIV.

The small molecule inhibitor used, BLZ945, has previously been studied for therapeutic use in amyotrophic lateral sclerosis (ALS) and brain cancer, but never before in the context of clearing HIV from the brain.

The study, which took place at the Tulane National Primate Research Center, utilized three groups to model human HIV infection and treatment: an untreated control group, and two groups treated with either a low or high dose of the small molecule inhibitor for 30 days. The high-dose treatment lead to a notable reduction in cells expressing HIV receptor sites, as well as a 95-99% decrease in viral DNA loads in the brain .

In addition to reducing viral loads, the treatment did not significantly impact microglia, the brain’s resident immune cells, which are essential for maintaining a healthy neuroimmune environment. It also did not show signs of liver toxicity at the doses tested.

The next step for the research team is to test this therapy in conjunction with ART to assess its efficacy in a combined treatment approach. This could pave the way for more comprehensive strategies to eradicate HIV from the body entirely.

This research was funded by the National Institutes of Health, including grants from the National Institute of Mental Health and the National Institute of Neurological Disorders and Stroke, and was supported with resources from the Tulane National Primate Research Center base grant of the National Institutes of Health, P51 OD011104.



Source link

Continue Reading

TOP SCEINCE

Chemical analyses find hidden elements from renaissance astronomer Tycho Brahe’s alchemy laboratory

Published

on

By

Bowtie resonators that build themselves bridge the gap between nanoscopic and macroscopic


In the Middle Ages, alchemists were notoriously secretive and didn’t share their knowledge with others. Danish Tycho Brahe was no exception. Consequently, we don’t know precisely what he did in the alchemical laboratory located beneath his combined residence and observatory, Uraniborg, on the now Swedish island of Ven.

Only a few of his alchemical recipes have survived, and today, there are very few remnants of his laboratory. Uraniborg was demolished after his death in 1601, and the building materials were scattered for reuse.

However, during an excavation in 1988-1990, some pottery and glass shards were found in Uraniborg’s old garden. These shards were believed to originate from the basement’s alchemical laboratory. Five of these shards — four glass and one ceramic — have now undergone chemical analyses to determine which elements the original glass and ceramic containers came into contact with.

The chemical analyses were conducted by Professor Emeritus and expert in archaeometry, Kaare Lund Rasmussen from the Department of Physics, Chemistry, and Pharmacy, University of Southern Denmark. Senior researcher and museum curator Poul Grinder-Hansen from the National Museum of Denmark oversaw the insertion of the analyses into historical context.

Enriched levels of trace elements were found on four of them, while one glass shard showed no specific enrichments. The study has been published in the journal Heritage Science.

“Most intriguing are the elements found in higher concentrations than expected — indicating enrichment and providing insight into the substances used in Tycho Brahe’s alchemical laboratory,” said Kaare Lund Rasmussen.

The enriched elements are nickel, copper, zinc, tin, antimony, tungsten, gold, mercury, and lead, and they have been found on either the inside or outside of the shards.

Most of them are not surprising for an alchemist’s laboratory. Gold and mercury were — at least among the upper echelons of society — commonly known and used against a wide range of diseases.

“But tungsten is very mysterious. Tungsten had not even been described at that time, so what should we infer from its presence on a shard from Tycho Brahe’s alchemy workshop?,” said Kaare Lund Rasmussen.

Tungsten was first described and produced in pure form more than 180 years later by the Swedish chemist Carl Wilhelm Scheele. Tungsten occurs naturally in certain minerals, and perhaps the element found its way to Tycho Brahe’s laboratory through one of these minerals. In the laboratory, the mineral might have undergone some processing that separated the tungsten, without Tycho Brahe ever realizing it.

However, there is also another possibility that Professor Kaare Lund Rasmussen emphasizes has no evidence whatsoever — but which could be plausible.

Already in the first half of the 1500s, the German mineralogist Georgius Agricola described something strange in tin ore from Saxony, which caused problems when he tried to smelt tin. Agricola called this strange substance in the tin ore “Wolfram” (German for Wolf’s froth, later renamed to tungsten in English).

“Maybe Tycho Brahe had heard about this and thus knew of tungsten’s existence. But this is not something we know or can say based on the analyses I have done. It is merely a possible theoretical explanation for why we find tungsten in the samples,” said Kaare Lund Rasmussen.

Tycho Brahe belonged to the branch of alchemists who, inspired by the German physician Paracelsus, tried to develop medicine for various diseases of the time: plague, syphilis, leprosy, fever, stomach aches, etc. But he distanced himself from the branch that tried to create gold from less valuable minerals and metals.

In line with the other medical alchemists of the time, he kept his recipes close to his chest and shared them only with a few selected individuals, such as his patron, Emperor Rudolph II, who allegedly received Tycho Brahe’s prescriptions for plague medicine.

We know that Tycho Brahe’s plague medicine was complicated to produce. It contained theriac, which was one of the standard remedies for almost everything at the time and could have up to 60 ingredients, including snake flesh and opium. It also contained copper or iron vitriol (sulphates), various oils, and herbs.

After various filtrations and distillations, the first of Brahe’s three recipes against plague was obtained. This could be made even more potent by adding tinctures of, for example, coral, sapphires, hyacinths, or potable gold.

“It may seem strange that Tycho Brahe was involved in both astronomy and alchemy, but when one understands his worldview, it makes sense. He believed that there were obvious connections between the heavenly bodies, earthly substances, and the body’s organs. Thus, the Sun, gold, and the heart were connected, and the same applied to the Moon, silver, and the brain; Jupiter, tin, and the liver; Venus, copper, and the kidneys; Saturn, lead, and the spleen; Mars, iron, and the gallbladder; and Mercury, mercury, and the lungs. Minerals and gemstones could also be linked to this system, so emeralds, for example, belonged to Mercury,” explained Poul Grinder-Hansen.

Kaare Lund Rasmussen has previously analyzed hair and bones from Tycho Brahe and found, among other elements, gold. This could indicate that Tycho Brahe himself had taken medicine that contained potable gold.



Source link

Continue Reading

TOP SCEINCE

Nitrogen emissions have a net cooling effect: But researchers warn against a climate solution

Published

on

By

Bowtie resonators that build themselves bridge the gap between nanoscopic and macroscopic


An international team of researchers has found that nitrogen emissions from fertilisers and fossil fuels have a net cooling effect on the climate. But they warn increasing atmospheric nitrogen has further damaging effects on the environment, calling for an urgent reduction in greenhouse gas emissions to halt global warming.

Published today in Nature, the paper found that reactive nitrogen released in the environment through human activities cools the climate by minus 0.34 watts per square metre. While global warming would have advanced further without the input of human-generated nitrogen, the amount would not offset the level of greenhouse gasses heating the atmosphere.

The paper was led by the Max Planck Institute in Germany and included authors from the University of Sydney. It comes one day after new data from the European Union’s Copernicus Climate Change Service indicated that Sunday, 21 July was the hottest day recorded in recent history.

The net cooling effect occurs in four ways:

  • Short-lived nitrogen oxides produced by the combustion of fossil fuels pollute the atmosphere by forming fine suspended particles which shield sunlight, in turn cooling the climate;

  • ammonia (a nitrogen and hydrogen-based compound) released into the atmosphere from the application of manure and artificial fertilisers has a similar effect;

  • nitrogen applied to crops allows plants to grow more abundantly, absorbing more CO2 from the atmosphere, enabling a cooling effect;

  • nitrogen oxides also play a role in the breakdown of atmospheric methane, a potent greenhouse gas.

The researchers warned that increasing atmospheric nitrogen was not a solution for combatting climate change.

“Nitrogen fertilisers pollute water and nitrogen oxides from fossil fuels pollute the air. Therefore, increasing rates of nitrogen in the atmosphere to combat climate change is not an acceptable compromise, nor is it a solution,” said Professor Federico Maggi from the University of Sydney’s School of Civil Engineering.

Sönke Zaehle from the Max Planck Institute said: “This may sound like good news, but you have to bear in mind that nitrogen emissions have many harmful effects, for example on health, biodiversity and the ozone layer. The current findings, therefore, are no reason to gloss over the harmful effects, let alone see additional nitrogen input as a means of combatting global warming.”

Elemental nitrogen, which makes up around 78 percent of the air, is climate-neutral, but other reactive nitrogen compounds can have direct or indirect effects on the global climate — sometimes warming and at other times cooling. Nitrous oxide (N2O) is an almost 300 times more potent greenhouse gas than CO2. Other forms of nitrogen stimulate the formation of ozone in the troposphere, which is a potent greenhouse gas and enhances global warming.

Professor Maggi said the research was important as it helped the team gain an understanding of the net-effect of the distribution of nitrogen emissions from agriculture.

“This work is an extraordinary example of how complex interactions at planetary scales cannot be captured with simplistic assessment tools. It shows the importance of developing mathematical models that can show the emergence of nonlinear — or unproportional — effects across soil, land, and atmosphere,” he said.

“Even if it appears counter-intuitive, reactive nitrogen introduced in the environment, mostly as agricultural fertilisers, can reduce total warming. However, this is minor compared with the reduction in greenhouse gas emissions required to keep the planet within safe and just operational boundaries.

“New generation computational tools are helping drive new learnings in climate change science, but understanding is not enough — we must act with great urgency to reduce greenhouse gas emissions.”

Gaining a holistic understanding of the impacts of nitrogen

The scientists determined the overall impact of nitrogen from human sources by first analysing the quantities of the various nitrogen compounds that end up in soil, water and air.

They then fed this data into models that depict the global nitrogen cycle and the effects on the carbon cycle, for example the stimulation of plant growth and ultimately the CO2 and methane content of the atmosphere. From the results of these simulations, they used another atmospheric chemistry model to calculate the effect of man-made nitrogen emissions on radiative forcing, that is the radiant energy that hits one square metre of the Earth’s surface per unit of time.



Source link

Continue Reading

Trending