Connect with us

Camera

Gitzo creates ever-lasting Légende tripod with unlimited warranty

Published

on

Gitzo creates ever-lasting Légende tripod with unlimited warranty

Disclaimer: Remember to do your research with any crowdfunding project before backing it. DPReview does its best to share only projects that look legitimate and come from reliable creators, but as with any crowdfunded campaign, there’s always the risk of the product or service never coming to fruition. Know that pledges to crowdfunding campaigns are not pre-orders and it should be seen as an investment in the potential for a product, not a final purchase. You can read more about the safeguards IndieGoGo has in place on its ‘Trust & Safety’ page.


Italian accessories manufacturer Gitzo has introduced a crowdfunding campaign for a new tripod that it says will last a lifetime, as it comes with an unlimited warranty and a free replacement parts service. The Legende carbon fiber travel tripod is designed to counteract ‘throwaway culture’ according to Gitzo, as most parts can be easily replaced by the user from an endless supply of components should anything go wrong.

The company says the tripod is constructed using 170 parts, all of which can be repaired in the event of a fault or damage occurring, so the tripod can always be mended instead of being thrown away. Seventy percent of those parts can be replaced by the user, and Gitzo will send the parts for free. Made with 100% carbon fiber legs the Legende weighs 1.45kg and can hold up to 8kg. It extends to 165cm and can hold a camera just 43cm from the ground.

The tripod is accompanied by a new Legende backpack that Gitzo says is friendly to the environment, being made with a high proportion of recycled materials. The whole of the bag’s exterior is made from recycled polyester while 65% of the weight of the bag is accounted for by recycled fabrics. The bag also benefits from an unlimited warranty.

Both the bag and the tripod are available for pre-order via an Indiegogo campaign, with a kit of the tripod, the backpack and a Mini Traveler tripod being offered for $699. The Legende tripod starts at $519 on its own, and the Legende backpack starts at $179.
For more information see the Gitzo website or the Gitzo Legende Indiegogo Campaign page.

Press release

Gitzo Pairs Expert Craftsmanship with Sustainability to Create Légende Tripod and Camera Backpack, Proving Legends Last Forever

Gitzo, world-renowned for over 100 years for setting the industry’s standard for innovative camera accessories, launched today the Légende Tripod and Camera Backpack.

Engineered to last a lifetime with low environmental impact, the Légende combo is inspired by the storytelling power of photography: transferred from one generation to another while creating eternal stories. The Légende products are designed to address “throwaway culture” by creating the smallest environmental footprint possible through sustainable materials built for optimal performance throughout its entire life and backed by an unlimited warranty. The Légende Tripod and Camera Bag is available today for pre-order on www.indiegogo.com and will ship to photographers in June 2021.

“As photographers, we photograph the wonders of the world and capture its beauty through our lens, so we wanted to create a product that would reduce its negative impact on the very planet that inspires us,” said Marco Pezzana, CEO of Gitzo. “We set out to create a product that was forever repairable, could withstand any adventure, and would never be thrown away. After months of design and development, we’re very excited to bring Légende to photographers across the globe.”

Unmatched Manufacturing Quality backed by Expert Craftsmanship

Gitzo continues cementing its legacy for manufacturing excellence, innovation and quality that lasts a lifetime as the Légende Tripod and Camera Bag are built to survive all of life’s adventures. Using high-quality materials in its premium design, the Légende products are made to be everlasting as a lifetime companion for generations. The travel tripod is lightweight and features one hundred percent carbon fiber legs for superior strength and stiffness. In addition, the precision aluminum leg locks provide ergonomic control with both knurling and rubber inserts.

Unlimited Warranty and Maintenance for the Eternal Story

Those who own the Légende tripod and backpack receive the exclusive benefit of an unlimited warranty, designed to usher in a circular economy that brings an end to the “throwaway culture.” The Légende Tripod is crafted of 170 individual parts that can be repaired instead of having to replace the tripod in case of damage. One hundred percent of the tripod parts are replaceable and seventy percent of those can be done by the owner, so the part will be shipped out directly for simple repair at no extra charge.

Sustainable Materials Reinforce Légende’s Earth-First Approach

Légende pushes to create the smallest environmental footprint possible with the use of sustainable materials that complement the unlimited warranty. One hundred percent of the backpack’s main exterior fabric is made up of recycled polyester and sixty-five percent of the entire bag weight is comprised of recycled fabrics. Additionally, the Eco Leather tripod strap and backpack details are made of cruelty-free, environmental-friendly, and non-toxic synthetic leather. It is light and extremely soft with great performance.

Supporting the Next Generation of Photographers

Légende backers will contribute to the development of Gitzo’s Wild Shots Outreach educational program, which seeks to educate the children bordering the Kruger National Park about conservation and photography. Five percent of campaign sales will go towards this program that will help the students by opening up eco employment opportunities and instilling the value of our protected spaces.

Légende Tripod Tech Spec Highlights

  • Weight 1.45kg
  • Payload: 8kg
  • Leg angles: 25°, 70°
  • Minimum Height: 43cm
  • Maximum Height: 165cm
  • Panoramic Rotation: 360 °
  • Front and Lateral Tilt: -90° / +40°

Availability

Available today through Indiegogo.com, the Légende tripod and backpack will be ready to ship in May 2021. Kit pricing will start at $699 for super early birds who will get a Légende Tripod, Backpack and Gitzo Mini Traveler.

Source link

Continue Reading
Click to comment

Leave a Reply

Camera

Halide announces Kino, a “Pro Video Camera” for iOS

Published

on

By

Halide announces Kino, a “Pro Video Camera” for iOS


Lux, the team behind the Apple Design Award-winning photography app Halide, has announced Kino, an app that it claims will bring pro-level video tools to iPhone users.

The developers state that Kino is intended to give users complete control in both automatic and manual shooting modes based on some clever built-in logic. The app includes a feature called AutoMotion, which automatically sets a 180º shutter angle in order to create cinematic motion blur. An ‘Auto’ label turns green when the settings are just right, letting you know you’re good to go. If the camera can’t achieve a 180º shutter, such as when shooting outdoors in bright light, you may need to add an ND filter to allow the shutter to lock onto the correct angle.

Another headline feature is Instant Grade, which takes advantage of Apple Log, available on the newest iPhone 15 Pro models. Apple’s camera app records Log footage in ProRes format, which creates large files and requires editing to finalize color; Instant Grade will allow users to apply color presets directly to Apple Log footage as it’s being captured and saves the recordings in the more efficient HEVC format, allowing for cinematic video straight out of camera. The app includes color presets from pro colorists, but users can import their own LUTs into the app as well.

Kino includes color presets created by professional colorists.

The app also includes advanced features, such as the ability to save files into either Apple’s Photos app or to a specific file location, composition guides, audio levels, USB-C storage compatibility, RGB waveform, manual focus with peaking, WB/AE lock, exposure compensation and a lockable user interface.

For beginners who may not be as familiar with a video-first workflow, the app will include free lessons on the basics of shooting video.

Kino is available beginning today at a promotional price of $9.99, though the company indicated that the price will increase to $19.99 “a few days after launch.”


Buy now:




Source link

Continue Reading

Camera

Sigma CEO talks market trends, the challenge of innovation and the future for APS-C

Published

on

By

Sigma CEO talks market trends, the challenge of innovation and the future for APS-C


Sigma CEO Kazuto Yamaki

Photo: Richard Butler

“All camera and lens manufacturers have to be innovative,” says Sigma CEO Kazuto Yamaki, but “technology competition among manufacturers may not always be beneficial to customers… Easier to use interfaces, compact and lightweight bodies for enhanced portability, or some other specifications might be more important.”

In the second part of a wide-ranging interview conducted at the CP+ show in Yokohama in late February, Yamaki talked about current state of the market, the need for innovation and the challenges of delivering that innovation.

State of the market

“Last year was not so bad,” he says, when asked about the state of the market: “It looks like the trend of the shrinking market has hit the bottom.” But he suggests this may not continue: “For the time being, many photographers are now switching from DSLR to mirrorless, which will sustain the market. However, after they switch to mirrorless cameras, I worry that the market could shrink in the coming years.”

“One reason for my concern is the increasing average price of cameras and lenses. I truly appreciate the passion of the customers who are still spending so much money on cameras and lenses. However, I’m afraid that not so many customers can afford such high-priced cameras and lenses, so we’re still trying hard to keep the retail price reasonable.”

“I’m afraid that not so many customers can afford such high-priced cameras and lenses”

“Especially these days, the younger generation takes huge amounts of photos with smartphones. While we can expect some of them to switch from a smartphone to a camera, many may find the price gap too wide, and challenging to make the switch.”

Yamaki also expresses concern about some of the tech trends he’s seeing: “Investing in the development of more advanced technology is crucial. However, it’s equally important to focus on our customers.”

“We’ve seen some cameras with very technically impressive specifications, but I worry that they’re not always capabilities that many photographers really need. Moving forward, I speculate that more user-friendly specifications might mean more to customers. Easier to use interfaces, a compact and lightweight body for enhanced portability, or some other specifications might be more important.”

The challenges of innovation

Sigma has launched some ambitious and unusual lenses in recent years, including the 14mm F1.4 DG DN. Yamaki describes astrophotography, for which it’s designed, as the most challenging subject.

Image: Sigma

He uses the recently announced 500mm F5.6 as an example of customer-focused innovation. “Canon and Nikon had similar lenses for DSLRs. They achieved it by using diffractive lens elements,” he explains: “Instead of using one powerful diffractive element, we used multiple special low-dispersion [SLD] glass. We used one SLD and three FLD elements. By using multiple special lenses, we could achieve a similar effect. That’s how we can make it so compact and lightweight.”

But this approach isn’t simple, he says: “It requires lots of very high manufacturing technology and skill, but because we have a very good factory and our optical designers trust the capability of our factory, we were able to go for this design.”

“In most cases, we are the first to use new types of glass, and once they see Sigma use that lens element, they start using it.”

“This trust is really, really important,” he explains: “Lens polishing is still a unique process that has a lower yield. Normally, in something like electronics, the yield ratio is something like 99.99996 percent, or something like that. But when it comes to lenses, for example, in our case, because our yield is so high, our yield ratio from the start of the process to the end is close to 90%. So if we plan to build 1,000 units of a specific lens, we have to start polishing 1,100 pieces, and during the process, about 10% of the lens elements will fail and have to be scrapped.”

A question of trust

“That’s the reason why other companies hesitate to use new glass elements. They are uncertain about the yield ratio. In most cases, we are the first to use a new type of element, and once they see Sigma use that lens element, they start using it. I’m very happy to play such a role. Sigma is kind of the guinea pig in the lens industry: they use Sigma as an experiment, and if we prove it, they use it.”

This commitment to pushing the use of new glass types reflects Yamaki’s wider vision of the company’s role. This can be seen in the ambitious lenses it’s recently introduced aimed at astrophotography, he says.

“First of all, I believe it’s one of Sigma’s missions to create niche products. If we only concentrate on standard products and release lower-priced versions, it’s not good: we would not be able to contribute to the development of the photography culture. As a lens manufacturer it’s our mission to develop such niche lenses that satisfy a specific target group.”

“Secondly, most lenses are so good, maybe much better than people’s expectations. But only astrophotographers are never satisfied: they’re so keen for quality! They’re looking at the shape of stars in the corners. Star images are the toughest, most challenging subject, or let’s say, the most nasty lens chart. You can see all kinds of aberrations in star images. That’s why we want to show what we can do with our capability. So lenses for astrophotography is my personal strong passion to show the capability of Sigma’s technology.”

The future of APS-C

Yamaki says the audience for its I-series of full-frame lenses, such as the 17mm F4 DG DN pictured, is similar to that for the DC DN range of APS-C primes. However, it doesn’t sound like there are plans for I-series-style versions of the DC lenses.

Image: Sigma

With all this talk of niches, we steered the conversation towards the DC DN primes. We wanted to know whether he sees the users of these lenses as distinct from those of the mid-priced i-Series full-frame primes, which feature metal bodies and aperture rings.

“I see they are very similar customers: those who value compactness and image quality. These customers often live in big cities and use public transportation a lot. So they cannot carry around big, heavy equipment in the car. They have to carry it around in their bags.”

Despite this, it doesn’t sound like there are any plans to refresh the DC DNs with more i-Series-like designs: “Those who want full-frame can use the I series lenses, while those who are happy with APS-C cameras can use the many lightweight DC DN lenses,” he says.

But, while we won’t expect APS-C primes with aperture rings for X-mount or the Nikon Z fc any time soon, Yamaki’s comments about his commitment to APS-C bode well, given the announcement that it’ll make lenses for both Nikon’s Z mount and Canon’s RF system:

“Our plan is to have a relatively complete range of lenses for APS-C sized sensors.”


This article was based on an interview conducted by Dale Baskin and Richard Butler at the CP+ show in Yokohama, Japan.



Source link

Continue Reading

Camera

Sigma CEO talks market trends, the challenge of innovation and the future for APS-C

Published

on

By

Sigma CEO talks market trends, the challenge of innovation and the future for APS-C


Sigma CEO Kazuto Yamaki

Photo: Richard Butler

“All camera and lens manufacturers have to be innovative,” says Sigma CEO Kazuto Yamaki, but “technology competition among manufacturers may not always be beneficial to customers… Easier to use interfaces, compact and lightweight bodies for enhanced portability, or some other specifications might be more important.”

In the second part of a wide-ranging interview conducted at the CP+ show in Yokohama in late February, Yamaki talked about current state of the market, the need for innovation and the challenges of delivering that innovation.

State of the market

“Last year was not so bad,” he says, when asked about the state of the market: “It looks like the trend of the shrinking market has hit the bottom.” But he suggests this may not continue: “For the time being, many photographers are now switching from DSLR to mirrorless, which will sustain the market. However, after they switch to mirrorless cameras, I worry that the market could shrink in the coming years.”

“One reason for my concern is the increasing average price of cameras and lenses. I truly appreciate the passion of the customers who are still spending so much money on cameras and lenses. However, I’m afraid that not so many customers can afford such high-priced cameras and lenses, so we’re still trying hard to keep the retail price reasonable.”

“I’m afraid that not so many customers can afford such high-priced cameras and lenses”

“Especially these days, the younger generation takes huge amounts of photos with smartphones. While we can expect some of them to switch from a smartphone to a camera, many may find the price gap too wide, and challenging to make the switch.”

Yamaki also expresses concern about some of the tech trends he’s seeing: “Investing in the development of more advanced technology is crucial. However, it’s equally important to focus on our customers.”

“We’ve seen some cameras with very technically impressive specifications, but I worry that they’re not always capabilities that many photographers really need. Moving forward, I speculate that more user-friendly specifications might mean more to customers. Easier to use interfaces, a compact and lightweight body for enhanced portability, or some other specifications might be more important.”

The challenges of innovation

Sigma has launched some ambitious and unusual lenses in recent years, including the 14mm F1.4 DG DN. Yamaki describes astrophotography, for which it’s designed, as the most challenging subject.

Image: Sigma

He uses the recently announced 500mm F5.6 as an example of customer-focused innovation. “Canon and Nikon had similar lenses for DSLRs. They achieved it by using diffractive lens elements,” he explains: “Instead of using one powerful diffractive element, we used multiple special low-dispersion [SLD] glass. We used one SLD and three FLD elements. By using multiple special lenses, we could achieve a similar effect. That’s how we can make it so compact and lightweight.”

But this approach isn’t simple, he says: “It requires lots of very high manufacturing technology and skill, but because we have a very good factory and our optical designers trust the capability of our factory, we were able to go for this design.”

“In most cases, we are the first to use new types of glass, and once they see Sigma use that lens element, they start using it.”

“This trust is really, really important,” he explains: “Lens polishing is still a unique process that has a lower yield. Normally, in something like electronics, the yield ratio is something like 99.99996 percent, or something like that. But when it comes to lenses, for example, in our case, because our yield is so high, our yield ratio from the start of the process to the end is close to 90%. So if we plan to build 1,000 units of a specific lens, we have to start polishing 1,100 pieces, and during the process, about 10% of the lens elements will fail and have to be scrapped.”

A question of trust

“That’s the reason why other companies hesitate to use new glass elements. They are uncertain about the yield ratio. In most cases, we are the first to use a new type of element, and once they see Sigma use that lens element, they start using it. I’m very happy to play such a role. Sigma is kind of the guinea pig in the lens industry: they use Sigma as an experiment, and if we prove it, they use it.”

This commitment to pushing the use of new glass types reflects Yamaki’s wider vision of the company’s role. This can be seen in the ambitious lenses it’s recently introduced aimed at astrophotography, he says.

“First of all, I believe it’s one of Sigma’s missions to create niche products. If we only concentrate on standard products and release lower-priced versions, it’s not good: we would not be able to contribute to the development of the photography culture. As a lens manufacturer it’s our mission to develop such niche lenses that satisfy a specific target group.”

“Secondly, most lenses are so good, maybe much better than people’s expectations. But only astrophotographers are never satisfied: they’re so keen for quality! They’re looking at the shape of stars in the corners. Star images are the toughest, most challenging subject, or let’s say, the most nasty lens chart. You can see all kinds of aberrations in star images. That’s why we want to show what we can do with our capability. So lenses for astrophotography is my personal strong passion to show the capability of Sigma’s technology.”

The future of APS-C

Yamaki says the audience for its I-series of full-frame lenses, such as the 17mm F4 DG DN pictured, is similar to that for the DC DN range of APS-C primes. However, it doesn’t sound like there are plans for I-series-style versions of the DC lenses.

Image: Sigma

With all this talk of niches, we steered the conversation towards the DC DN primes. We wanted to know whether he sees the users of these lenses as distinct from those of the mid-priced i-Series full-frame primes, which feature metal bodies and aperture rings.

“I see they are very similar customers: those who value compactness and image quality. These customers often live in big cities and use public transportation a lot. So they cannot carry around big, heavy equipment in the car. They have to carry it around in their bags.”

Despite this, it doesn’t sound like there are any plans to refresh the DC DNs with more i-Series-like designs: “Those who want full-frame can use the I series lenses, while those who are happy with APS-C cameras can use the many lightweight DC DN lenses,” he says.

But, while we won’t expect APS-C primes with aperture rings for X-mount or the Nikon Z fc any time soon, Yamaki’s comments about his commitment to APS-C bode well, given the announcement that it’ll make lenses for both Nikon’s Z mount and Canon’s RF system:

“Our plan is to have a relatively complete range of lenses for APS-C sized sensors.”


This article was based on an interview conducted by Dale Baskin and Richard Butler at the CP+ show in Yokohama, Japan.



Source link

Continue Reading

Trending

Copyright © 2017 Zox News Theme. Theme by MVP Themes, powered by WordPress.