Connect with us


Lightning strikes played a vital role in life’s origins on Earth



Lightning strikes played a vital role in life’s origins on Earth

Lightning strikes were just as important as meteorites in creating the perfect conditions for life to emerge on Earth, geologists say.

Minerals delivered to Earth in meteorites more than 4 billion years ago have long been advocated as key ingredients for the development of life on our planet.Scientists believed minimal amounts of these minerals were also brought to early Earth through billions of lightning strikes.

But now researchers from the University of Leeds have established that lightning strikes were just as significant as meteorites in performing this essential function and allowing life to manifest.

They say this shows that life could develop on Earth-like planets through the same mechanism at any time if atmospheric conditions are right. The research was led by Benjamin Hess during his undergraduate studies at the University of Leeds in the School of Earth and Environment.

Mr Hess and his mentors were studying an exceptionally large and pristine sample of fulgurite, — a rock created when lightning strikes the ground. The sample was formed when lightning struck a property in Glen Ellyn, Illinois, USA, in 2016, and donated to the geology department at Wheaton College nearby.

The Leeds researchers were initially interested in how fulgurite is formed but were fascinated to discover in the Glen Ellyn sample a large amount of a highly unusual phosphorus mineral called schreibersite.

Phosphorus is essential to life and plays a key role in all life processes from movement to growth and reproduction. The phosphorus present on early Earth’s surface was contained in minerals that cannot dissolve in water, but schreibersite can.

Mr Hess, now a PhD student at Yale University, Connecticut, USA, said: “Many have suggested that life on Earth originated in shallow surface waters, following Darwin’s famous “warm little pond” concept.

“Most models for how life may have formed on Earth’s surface invoke meteorites which carry small amounts of schreibersite. Our work finds a relatively large amount of schreibersite in the studied fulgurite.

“Lightning strikes Earth frequently, implying that the phosphorus needed for the origin of life on Earth’s surface does not rely solely on meteorite hits.”Perhaps more importantly, this also means that the formation of life on other Earth-like planets remains possible long after meteorite impacts have become rare.”

The team estimate that phosphorus minerals made by lightning strikes surpassed those from meteorites when the earth was around 3.5 billion years old, which is about the age of the earliest known micro-fossils, making lightning strikes significant in the emergence of life on the planet.

Furthermore, lightning strikes are far less destructive than meteor hits, meaning they were much less likely to interfere with the delicate evolutionary pathways in which life could develop.

The research, titled Lightning strikes as a major facilitator of prebiotic phosphorus reduction on early Earth, is published today (SEE EMBARGO) in Nature Communications.

The School of Earth and Environment funded the project under a scheme which enables undergraduate led research using high-end analytical facilities.

Dr Jason Harvey, Associate Professor of Geochemistry in Leeds’ School of Earth and Environment, and Sandra Piazolo, Professor of Structural Geology and Tectonics in the School of Earth and Environment, mentored Mr Hess in the research project.

Dr Harvey said: “The early bombardment is a once in a solar system event. As planets reach their mass, the delivery of more phosphorus from meteors becomes negligible.

“Lightning, on the other hand, is not such a one-off event. If atmospheric conditions are favourable for the generation of lightning, elements essential to the formation of life can be delivered to the surface of a planet.

“This could mean that life could emerge on Earth-like planets at any point in time.”

Professor Piazolo said: “Our exciting research opens the door to several future avenues of investigation, including search for and in-depth analysis of fresh fulgurite in Early Earth-like environment; in-depth analysis of the effect of flash heating on other minerals to recognize such features in the rock record, and further analysis of this exceptionally well-preserved fulgurite to identify the range of physical and chemical processes within.

“”All these studies will help up to increase our understanding of the importance of fulgurite in changing the chemical environment of Earth through time.””

Source link


This alloy is kinky




Lightning strikes played a vital role in life’s origins on Earth

Researchers have uncovered a remarkable metal alloy that won’t crack at extreme temperatures due to kinking, or bending, of crystals in the alloy at the atomic level.  A metal alloy composed of niobium, tantalum, titanium, and hafnium has shocked materials scientists with its impressive strength and toughness at both extremely hot and cold temperatures, a combination of properties that seemed so far to be nearly impossible to achieve. In this context, strength is defined as how much force a material can withstand before it is permanently deformed from its original shape, and toughness is its resistance to fracturing (cracking). The alloy’s resilience to bending and fracture across an enormous range of conditions could open the door for a novel class of materials for next-generation engines that can operate at higher efficiencies.

The team, led by Robert Ritchie at Lawrence Berkeley National Laboratory (Berkeley Lab) and UC Berkeley, in collaboration with the groups led by professors Diran Apelian at UC Irvine and Enrique Lavernia at Texas A&M University, discovered the alloy’s surprising properties and then figured out how they arise from interactions in the atomic structure. Their work is described in a study that was published April 11, 2024 in Science.

“The efficiency of converting heat to electricity or thrust is determined by the temperature at which fuel is burned — the hotter, the better. However, the operating temperature is limited by the structural materials which must withstand it,” said first author David Cook, a Ph.D. student in Ritchie’s lab. “We have exhausted the ability to further optimize the materials we currently use at high temperatures, and there’s a big need for novel metallic materials. That’s what this alloy shows promise in.”

The alloy in this study is from a new class of metals known as refractory high or medium entropy alloys (RHEAs/RMEAs). Most of the metals we see in commercial or industrial applications are alloys made of one main metal mixed with small quantities of other elements, but RHEAs and RMEAs are made by mixing near-equal quantities of metallic elements with very high melting temperatures, which gives them unique properties that scientists are still unraveling. Ritchie’s group has been investigating these alloys for several years because of their potential for high-temperature applications.

“Our team has done previous work on RHEAs and RMEAs and we have found that these materials are very strong, but generally possess extremely low fracture toughness, which is why we were shocked when this alloy displayed exceptionally high toughness,” said co-corresponding author Punit Kumar, a postdoctoral researcher in the group.

According to Cook, most RMEAs have a fracture toughness less than 10 MPa√m, which makes them some of the most brittle metals on record. The best cryogenic steels, specially engineered to resist fracture, are about 20 times tougher than these materials. Yet the niobium, tantalum, titanium, and hafnium (Nb45Ta25Ti15Hf15) RMEA alloy was able to beat even the cryogenic steel, clocking in at over 25 times tougher than typical RMEAs at room temperature.

But engines don’t operate at room temperature. The scientists evaluated strength and toughness at five temperatures total: -196°C (the temperature of liquid nitrogen), 25°C (room temperature), 800°C, 950°C, and 1200°C. The last temperature is about 1/5 the surface temperature of the sun.

The team found that the alloy had the highest strength in the cold and became slightly weaker as the temperature rose, but still boasted impressive figures throughout the wide range. The fracture toughness, which is calculated from how much force it takes to propagate an existing crack in a material, was high at all temperatures.

Unraveling the atomic arrangements

Almost all metallic alloys are crystalline, meaning that the atoms inside the material are arranged in repeating units. However, no crystal is perfect, they all contain defects. The most prominent defect that moves is called the dislocation, which is an unfinished plane of atoms in the crystal. When force is applied to a metal it causes many dislocations to move to accommodate the shape change. For example, when you bend a paper clip which is made of aluminum, the movement of dislocations inside the paper clip accommodates the shape change. However, the movement of dislocations becomes more difficult at lower temperatures and as a result many materials become brittle at low temperatures because dislocations cannot move. This is why the steel hull of the Titanic fractured when it hit an iceberg. Elements with high melting temperatures and their alloys take this to the extreme, with many remaining brittle up to even 800°C. However, this RMEA bucks the trend, withstanding snapping even at temperatures as low as liquid nitrogen (-196°C).

To understand what was happening inside the remarkable metal, co-investigator Andrew Minor and his team analyzed the stressed samples, alongside unbent and uncracked control samples, using four-dimensional scanning transmission electron microscopy (4D-STEM) and scanning transmission electron microscopy (STEM) at the National Center for Electron Microscopy, part of Berkeley Lab’s Molecular Foundry.

The electron microscopy data revealed that the alloy’s unusual toughness comes from an unexpected side effect of a rare defect called a kink band. Kink bands form in a crystal when an applied force causes strips of the crystal to collapse on themselves and abruptly bend. The direction in which the crystal bends in these strips increases the force that dislocations feel, causing them to move more easily. On the bulk level, this phenomenon causes the material to soften (meaning that less force has to be applied to the material as it is deformed). The team knew from past research that kink bands formed easily in RMEAs, but assumed that the softening effect would make the material less tough by making it easier for a crack to spread through the lattice. But in reality, this is not the case.

“We show, for the first time, that in the presence of a sharp crack between atoms, kink bands actually resist the propagation of a crack by distributing damage away from it, preventing fracture and leading to extraordinarily high fracture toughness,” said Cook.

The Nb45Ta25Ti15Hf15 alloy will need to undergo a lot more fundamental research and engineering testing before anything like a jet plane turbine or SpaceX rocket nozzle is made from it, said Ritchie, because mechanical engineers rightfully require a deep understanding of how their materials perform before they use them in the real world. However, this study indicates that the metal has potential to build the engines of the future.

This research was conducted by David H. Cook, Punit Kumar, Madelyn I. Payne, Calvin H. Belcher, Pedro Borges, Wenqing Wang, Flynn Walsh, Zehao Li, Arun Devaraj, Mingwei Zhang, Mark Asta, Andrew M. Minor, Enrique J. Lavernia, Diran Apelian, and Robert O. Ritchie, scientists at Berkeley Lab, UC Berkeley, Pacific Northwest National Laboratory, and UC Irvine, with funding from the Department of Energy (DOE) Office of Science. Experimental and computational analysis was conducted at the Molecular Foundry and the National Energy Research Scientific Computing Center — both are DOE Office of Science user facilities.

Source link

Continue Reading


Giant galactic explosion exposes galaxy pollution in action




Lightning strikes played a vital role in life’s origins on Earth

A team of international researchers studied galaxy NGC 4383, in the nearby Virgo cluster, revealing a gas outflow so large that it would take 20,000 years for light to travel from one side to the other.

The discovery was published today in the journal Monthly Notices of the Royal Astronomical Society.

Lead author Dr Adam Watts, from The University of Western Australia node at the International Centre for Radio Astronomy Research (ICRAR), said the outflow was the result of powerful stellar explosions in the central regions of the galaxy that could eject enormous amounts of hydrogen and heavier elements.

The mass of gas ejected is equivalent to more than 50 million Suns.

“Very little is known about the physics of outflows and their properties because outflows are very hard to detect,” Dr Watts said.

“The ejected gas is quite rich in heavy elements giving us a unique view of the complex process of mixing between hydrogen and metals in the outflowing gas.

“In this particular case, we detected oxygen, nitrogen, sulphur and many other chemical elements.”

Gas outflows are crucial to regulate how fast and for how long galaxies can keep forming stars. The gas ejected by these explosions pollutes the space between stars within a galaxy, and even between galaxies, and can float in the intergalactic medium forever.

The high-resolution map was produced with data from the MAUVE survey, co-led by ICRAR researchers Professors Barbara Catinella and Luca Cortese, who were also co-authors of the study.

The survey used the MUSE Integral Field Spectrograph on the European Southern Observatory’s Very Large Telescope, located in northern Chile.

“We designed MAUVE to investigate how physical processes such as gas outflows help stop star formation in galaxies,” Professor Catinella said.

“NGC 4383 was our first target, as we suspected something very interesting was happening, but the data exceeded all our expectations.

“We hope that in the future, MAUVE observations reveal the importance of gas outflows in the local Universe with exquisite detail.”

Source link

Continue Reading


AI and physics combine to reveal the 3D structure of a flare erupting around a black hole




Lightning strikes played a vital role in life’s origins on Earth

Scientists believe the environment immediately surrounding a black hole is tumultuous, featuring hot magnetized gas that spirals in a disk at tremendous speeds and temperatures. Astronomical observations show that within such a disk, mysterious flares occur up to several times a day, temporarily brightening and then fading away. Now a team led by Caltech scientists has used telescope data and an artificial intelligence (AI) computer-vision technique to recover the first three-dimensional video showing what such flares could look like around Sagittarius A* (Sgr A*, pronounced sadge-ay-star), the supermassive black hole at the heart of our own Milky Way galaxy.

The 3D flare structure features two bright, compact features located about 75 million kilometers (or half the distance between Earth and the Sun) from the center of the black hole. It is based on data collected by the Atacama Large Millimeter Array (ALMA) in Chile over a period of 100 minutes directly after an eruption seen in X-ray data on April 11, 2017.

“This is the first three-dimensional reconstruction of gas rotating close to a black hole,” says Katie Bouman, assistant professor of computing and mathematical sciences, electrical engineering and astronomy at Caltech, whose group led the effort described in a new paper in Nature Astronomy.

Aviad Levis, a postdoctoral scholar in Bouman’s group and lead author on the new paper, emphasizes that while the video is not a simulation, it is also not a direct recording of events as they took place. “It is a reconstruction based on our models of black hole physics. There is still a lot of uncertainty associated with it because it relies on these models being accurate,” he says.

Using AI informed by physics to figure out possible 3D structures

To reconstruct the 3D image, the team had to develop new computational imaging tools that could, for example, account for the bending of light due to the curvature of space-time around objects of enormous gravity, such as a black hole.

The multidisciplinary team first considered if it would be possible to create a 3D video of flares around a black hole in June 2021. The Event Horizon Telescope (EHT) Collaboration, of which Bouman and Levis are members, had already published the first image of the supermassive black hole at the core of a distant galaxy, called M87, and was working to do the same with EHT data from Sgr A*. Pratul Srinivasan of Google Research, a co-author on the new paper, was at the time visiting the team at Caltech. He had helped develop a technique known as neural radiance fields (NeRF) that was then just starting to be used by researchers; it has since had a huge impact on computer graphics. NeRF uses deep learning to create a 3D representation of a scene based on 2D images. It provides a way to observe scenes from different angles, even when only limited views of the scene are available.

The team wondered if, by building on these recent developments in neural network representations, they could reconstruct the 3D environment around a black hole. Their big challenge: From Earth, as anywhere, we only get a single viewpoint of the black hole.

The team thought that they might be able to overcome this problem because gas behaves in a somewhat predictable way as it moves around the black hole. Consider the analogy of trying to capture a 3D image of a child wearing an inner tube around their waist. To capture such an image with the traditional NeRF method, you would need photos taken from multiple angles while the child remained stationary. But in theory, you could ask the child to rotate while the photographer remained stationary taking pictures. The timed snapshots, combined with information about the child’s rotation speed, could be used to reconstruct the 3D scene equally well. Similarly, by leveraging knowledge of how gas moves at different distances from a black hole, the researchers aimed to solve the 3D flare reconstruction problem with measurements taken from Earth over time.

With this insight in hand, the team built a version of NeRF that takes into account how gas moves around black holes. But it also needed to consider how light bends around massive objects such as black holes. Under the guidance of co-author Andrew Chael of Princeton University, the team developed a computer model to simulate this bending, also known as gravitational lensing.

With these considerations in place, the new version of NeRF was able to recover the structure of orbiting bright features around the event horizon of a black hole. Indeed, the initial proof-of-concept showed promising results on synthetic data.

A flare around Sgr A* to study

But the team needed some real data. That’s where ALMA came in. The EHT’s now famous image of Sgr A* was based on data collected on April 6-7, 2017, which were relatively calm days in the environment surrounding the black hole. But astronomers detected an explosive and sudden brightening in the surroundings just a few days later, on April 11. When team member Maciek Wielgus of the Max Planck Institute for Radio Astronomy in Germany went back to the ALMA data from that day, he noticed a signal with a period matching the time it would take for a bright spot within the disk to complete an orbit around Sgr A*. The team set out to recover the 3D structure of that brightening around Sgr A*.

ALMA is one of the most powerful radio telescopes in the world. However, because of the vast distance to the galactic center (more than 26,000 light-years), even ALMA does not have the resolution to see Sgr A*’s immediate surroundings. What ALMA measures are light curves, which are essentially videos of a single flickering pixel, which are created by collecting all of the radio-wavelength light detected by the telescope for each moment of observation.

Recovering a 3D volume from a single-pixel video might seem impossible. However, by leveraging an additional piece of information about the physics that are expected for the disk around black holes, the team was able to get around the lack of spatial information in the ALMA data.

Strongly polarized light from the flares provided clues

ALMA doesn’t just capture a single light curve. In fact, it provides several such “videos” for each observation because the telescope records data relating to different polarization states of light. Like wavelength and intensity, polarization is a fundamental property of light and represents which direction the electric component of a light wave is oriented with respect to the wave’s general direction of travel. “What we get from ALMA is two polarized single-pixel videos,” says Bouman, who is also a Rosenberg Scholar and a Heritage Medical Research Institute Investigator. “That polarized light is actually really, really informative.”

Recent theoretical studies suggest that hot spots forming within the gas are strongly polarized, meaning the light waves coming from these hot spots have a distinct preferred orientation direction. This is in contrast to the rest of the gas, which has a more random or scrambled orientation. By gathering the different polarization measurements, the ALMA data gave the scientists information that could help localize where the emission was coming from in 3D space.

Introducing Orbital Polarimetric Tomography

To figure out a likely 3D structure that explained the observations, the team developed an updated version of its method that not only incorporated the physics of light bending and dynamics around a black hole but also the polarized emission expected in hot spots orbiting a black hole. In this technique, each potential flare structure is represented as a continuous volume using a neural network. This allows the researchers to computationally progress the initial 3D structure of a hotspot over time as it orbits the black hole to create a whole light curve. They could then solve for the best initial 3D structure that, when progressed in time according to black hole physics, matched the ALMA observations.

The result is a video showing the clockwise movement of two compact bright regions that trace a path around the black hole. “This is very exciting,” says Bouman. “It didn’t have to come out this way. There could have been arbitrary brightness scattered throughout the volume. The fact that this looks a lot like the flares that computer simulations of black holes predict is very exciting.”

Levis says that the work was uniquely interdisciplinary: “You have a partnership between computer scientists and astrophysicists, which is uniquely synergetic. Together, we developed something that is cutting edge in both fields — both the development of numerical codes that model how light propagates around black holes and the computational imaging work that we did.”

The scientists note that this is just the beginning for this exciting technology. “This is a really interesting application of how AI and physics can come together to reveal something that is otherwise unseen,” says Levis. “We hope that astronomers could use it on other rich time-series data to shed light on complex dynamics of other such events and to draw new conclusions.”

Source link

Continue Reading


Copyright © 2017 Zox News Theme. Theme by MVP Themes, powered by WordPress.