Solar Energy
Novel two-polymer membrane boosts hydrogen fuel cell performance
A considerable portion of the efforts to realize a sustainable world has gone into developing hydrogen fuel cells so that a hydrogen economy can be achieved. Fuel cells have distinctive advantages: high energy-conversion efficiencies (up to 70%) and a clean by-product, water.
In the past decade, anion exchange membrane fuel cells (AEMFC), which convert chemical energy to electrical energy via the transport of negatively charged ions (anions) through a membrane, have received attention due to their low-cost and relative environment friendliness compared to other types of fuel cells.
But while inexpensive, AEMFCs suffer from several major drawbacks such as low ion conductivity, low chemical stability of the membrane, and an overall lower performance rate than its counterparts. Now, in a study published in the Journal of Materials Chemistry A, scientists from Korea report a novel membrane that is both thin and strong, and takes care of these drawbacks.
To develop their membrane, the scientists used a novel method: they chemically bonded two commercially available polymers, poly(2,6-dimethyl-1,4-phenylene oxide) (PPO) and poly(styrene-b-(ethylene-co-butylene)-b-styrene) (SEBS) without using a crosslinking agent.
Professor Tae-Hyun Kim from Incheon National University, who led the study, explains, “A previous study made a similar attempt to fabricate anion exchange membranes (AEMs) by crosslinking PPO and SEBS with diamine as a crosslinking agent. While the AEMs displayed excellent mechanical stability, the use of diamine could have led to different reactions other than those between PPO and SEBS, which made it difficult to control the properties of the resultant membrane.
Therefore, in our study, we crosslinked PPO and SEBS without any crosslinking agent to ensure that only PPO and SEBS react with each other.” The strategy used by Prof. Kim’s team also involved adding a compound called triazole to PPO to increase the membrane’s ion conductivity.
Membranes fabricated using this method were up to 10 um thin and had excellent mechanical strength, chemical stability, and conductivity at even a 95% room humidity. Together, these conferred a high overall performance to the membrane and to the corresponding fuel cell on which the scientists tested their membrane. When operated at 60C, this fuel cell exhibited stable performance for 300 hours with a maximum power density surpassing those of existing commercial AEMs and matching cutting-edge ones.
Excited about the future prospects of this novel promising AEM, Prof. Kim says, “The polymer electrolyte membranes in our study can be applied not only to fuel cells that generate energy, but also to water electrolysis technology that produces hydrogen. Therefore, I believe this research will play a vital role in revitalizing the domestic hydrogen economy.”
Perhaps that clean and green world we envision is not far away!
Leave a Reply
800-mn-euro battery factory to be built in Finland
by AFP Staff Writers
Helsinki (AFP) Mar 20, 2025
A Chinese-Finnish company announced Thursday it would begin building a battery materials plant in Finland in April, the first of its kind in the Nordic country.
The plant will produce cathode active material, a key component in lithium-ion batteries used in electric vehicles and for energy storage, said Easpring Finland New Materials, a company co-owned by Finnish Minerals Group and Beijing Easpring Material Technology.
It said the investment was worth 800 million euros ($868 million).
The announcement came one week after a bankruptcy filing by Swedish battery maker Northvolt, which had planned to develop cathode production but dropped those plans to focus on battery cell production as it fought for survival.
Easpring Finland New Materials said commercial production was expected to begin in 2027.
The plant, to be located in Kotka in southeast Finland, will initially produce 60,000 tonnes of cathode active material annually.
At full production capacity, it could supply cathode material for the production of around 750,000 electric vehicles annually, the company said.
Matti Hietanen, the chief executive of Finnish Minerals Group, said the investment created an “entirely new kind of industry in Finland related to the production of lithium-ion batteries” and represented a European “spearhead project for the industry.”
The new plant will employ 270 people and an area of around 80 hectares had been reserved for its construction.
Related Links
Nanocellulose infused with red onion extract shields solar cells from UV degradation
by Robert Schreiber
Berlin, Germany (SPX) Mar 20, 2025
Researchers at the University of Turku in Finland have developed a bio-based film that provides high-performance UV protection for solar cells, utilizing nanocellulose treated with red onion skin extract. This marks the first comparative study of how various bio-derived UV filters perform over time.
Solar cells, susceptible to damage from ultraviolet radiation, are typically shielded by petroleum-derived films such as polyvinyl fluoride (PVF) or polyethylene terephthalate (PET). In an effort to reduce reliance on fossil fuels, researchers are exploring sustainable alternatives like nanocellulose, a material made by refining cellulose into nanoscale fibers that can be customized for UV blocking capabilities.
The study, conducted in collaboration with Aalto University in Finland and Wageningen University in the Netherlands, revealed that nanocellulose films dyed with red onion extract blocked 99.9% of UV rays up to 400 nanometres. This performance surpassed that of commercial PET-based filters, which served as a benchmark in the research.
“Nanocellulose films treated with red onion dye are a promising option in applications where the protective material should be bio-based,” stated Doctoral Researcher Rustem Nizamov from the University of Turku.
Researchers evaluated four types of nanocellulose films enhanced with red onion extract, lignin, or iron ions, all known for their UV-filtering properties. Among them, the film incorporating red onion extract demonstrated the most effective UV shielding.
Effective UV protection must be balanced with the ability to transmit visible and near-infrared light, essential for solar energy conversion. While materials like lignin excel in UV absorption, their dark hue hinders transparency. In contrast, the red onion-based film achieved over 80% light transmission at wavelengths between 650 and 1,100 nanometres, maintaining this level over extended testing.
To simulate prolonged outdoor use, the films were exposed to artificial light for 1,000 hours, equating to roughly one year of natural sunlight in central Europe. Researchers tracked changes in the films and solar cells through digital imaging.
“The study emphasised the importance of long-term testing for UV filters, as the UV protection and light transmittance of the other bio-based filters changed significantly over time. For example, the films treated with iron ions had good initial transmittance which reduced after aging,” tells Nizamov.
Tests focused on dye-sensitised solar cells, which are particularly prone to UV-induced deterioration. The findings also have broader implications for other solar technologies like perovskite and organic photovoltaics, where bio-based UV filters could play a crucial role.
“These results are also relevant for the UV protection of other types of solar cells, including perovskite and organic photovoltaics, as well as any application where the use of a bio-based UV filter is paramount,” Nizamov says.
Looking ahead, the researchers aim to create biodegradable solar cells that could serve as power sources in applications such as food packaging sensors.
“The forest industry is interested in developing new high-grade products. In the field of electronics, these may also be components for solar cells,” noted Kati Miettunen, Professor in Materials Engineering.
The University of Turku’s Solar Energy Materials and Systems (SEMS) group is exploring ways to integrate solar technologies into broader energy systems.
This work was part of the BioEST project, supported by the Research Council of Finland.
Related Links
University of Turku
All About Solar Energy at SolarDaily.com
Space Solar teams with MagDrive to boost in-orbit solar power systems
by Sophie Jenkins
London, UK (SPX) Mar 20, 2025
Space Solar, a leading force in the field of space-based solar power (SBSP), has formed a strategic alliance with UK propulsion technology company Magdrive to enhance the deployment of large-scale infrastructure in orbit. The agreement, unveiled during the Farnborough International Space Show (FISS), is formalized under the Space Propulsion and Infrastructure Innovation Initiative (SPI3), reflecting a concerted push to realize space-driven clean energy.
SPI3 is designed to help fulfil the UK’s long-term goal of producing scalable, sustainable energy directly from space. By integrating Magdrive’s advanced propulsion systems, the initiative addresses the complex challenge of transporting, assembling, and managing substantial SBSP infrastructure in orbit.
Space Solar plans to launch its first 30-megawatt SBSP platform within five years, and success hinges on the ability to control and maintain massive solar satellite structures. Magdrive’s propulsion solutions are poised to support upcoming demonstration missions by enabling essential orbital maneuvers, satellite assembly, and shape optimization.
“Innovation in propulsion is essential to making large-scale space infrastructure a reality,” said Sam Adlen, Co-CEO of Space Solar. “Space Solar and Magdrive share a vision of advancing sustainable space operations that benefit earth, and this collaboration will pave the way for new propulsion solutions that will be indispensable for space-based solar power and other large scale space infrastructure.”
This partnership is also set to strengthen the UK’s space sector by stimulating high-value job creation and technological advancement. It highlights the country’s dedication to leading innovation at the intersection of clean energy and aerospace.
As part of SPI3, both companies will collaborate on refining propulsion specifications tailored to SBSP systems and identify additional applications for these technologies within the broader context of UK-led space initiatives. The cooperation is a key step towards expanding the UK’s footprint in the global space economy and unlocking emerging opportunities in space-based energy markets.
“We’re excited to work with Space Solar, they’re building the future of space energy and infrastructure on a scale never seen before. By working together we’ll be propelling the space industry towards enabling sustainable life on earth. Here’s to the new space age!” said Mark Stokes, CEO, MagDrive.
United by a vision to deliver scalable energy solutions from space, Space Solar and Magdrive’s agreement represents a pivotal move toward the commercialization of SBSP. As Space Solar progresses toward critical mission milestones, incorporating Magdrive’s propulsion technology will bring the reality of space-derived clean energy closer than ever.
Related Links
-
Solar Energy3 years agoDLR testing the use of molten salt in a solar power plant in Portugal
-
TOP SCEINCE7 months agoSearching old stem cells that stay young forever
-
Camera1 year agoDJI Air 3 vs. Mini 4 Pro: which compact drone is best?
-
Indian Defense4 years ago
Israeli Radar Company Signs MoU To Cooperate With India’s Alpha Design Technologies
-
Camera1 year agoSony a9 III: what you need to know
-
world news5 months ago
Sirens trigger across central Israel following rocket barrage targeting Tel Aviv Iron Dome battery
-
world news5 months ago
Hezbollah’s gold mine catches fire: Nasrallah’s bunker under hospital held half billion dollars
-
world news1 year ago
Gulf, France aid Gaza, Russia evacuates citizens
Pingback: Increasing battery and fuel cell power with quantum computing |