The Sony FX5 is a compact cinema camera capable of up to 4.5K120 and Raw video capture, aimed at independent videographers and small productions. It builds on the legacy of the FX3, adding a host of features we’ve not previously seen from Sony.

Key features

• 16.6MP Full-Frame stacked CMOS sensor
• 4K/60 from 5K capture
• 4K/120 from 4.5K crop
• 4K/240 capability via firmware due in late 2027
• Open gate shooting
• Combined dual gain mode for increased DR
• Three “base” ISO steps
• Internal Raw capture
• Subject recognition autofocuse
• 32-bit float audio compatibility
• Large 16:9 rear LCD
• Waveform display
• Optional EVF

The FX5 will be available, body-only, for $4899, or $5499 with the XLR top-handle, which allows 32-bit float audio capture. Other optional accessories include a removable, tiltable viewfinder and a USB-C-to-BNC timecode cable. It will be available from August.

What’s new

The FX5 is a surprisingly significant upgrade compared to the FX3, suggesting Sony is still working out what this type of camera needs to offer, and iterating. It nominally sits above the FX3 but looks like it’s trying to do what the FX3 did, plus a lot more, making it most directly comparable to the likes of Canon’s C50 cinema camera.

The most visible addition is its ability to capture Raw footage, but that’s just the most dramatic departure from the existing camera. There are also a host of features and UI changes that have come down directly from the company’s pro cinema products, to the degree that it represents not just a major upgrade but will also present an appreciable learning curve for existing FX3 users.

Don’t call it Raw

Interestingly, Sony doesn’t refer to the camera’s Raw mode in those terms, instead settling on the snappy X-OCN, which I’m sure we can agree is clearer. They tell us it’s a 16-bit linear Raw format, which is a lot more detail than we’re typically given about the other Raw video codecs. Linear encoding is a rather inefficient way of doing things but, in theory at least, gives the maximum flexibility in terms of highlight editing and reconstruction.

This “EXtended tonal range Orginal Camera Negative” gives you more flexibility in terms of correcting white balance, applying noise reduction, highlight and tonal adjustment and color grading. It’s a version of the format already used by the Burano and Venice cameras, so should be compatible with DaVinci Resolve, Adobe Premiere Pro, Avid Media Composer and Baselight software.

The FX5 uses the X-OCN LT (Light) version of the codec, used on the Burano cinema camera (and that’s even an option on the company’s flagship Venice 2 model).

New sensor

James Tirado

The FX5 is based around a new stacked CMOS sensor. Sony quotes the pixel count as 16.6MP which, given the FX3 turned out to have a 48MP behind a 12MP color filter array, should make us wonder how similar it is to the 66.8MP sensor in the recent a7R VI.

Sony wouldn’t be specific about any differences, but the significantly higher output speeds make us assume that there’s DRAM or more complex readout circuitry built into the back of the sensor. We know that the a7R VI’s 4K video comes from combining quartets of pixels, so placing that same pixel architecture behind oversized color filters that extend across sets of four pixels would make a lot of sense. Even if you’re not that interested in video, this ability to produce variations of a sensor with different capabilities might still offer an interesting insight into the products we’ll see in the coming years.

In practice, the FX5 is faster at reading out a comparable region of its sensor (around 5.5ms in full-width, 16:9 5K modes, around 24% quicker than the 7.2ms that the a7R VI takes in its ‘5K sampled’ 16:9 modes). Open gate mode read out the full height of the sensor in 8.3ms (1/120 sec).

Sony says the camera has a “Dual Gain” mode that boosts dynamic range by combining the low gain and high-gain signals being read off the sensor. It is available in the camera’s lowest native gain mode (ISO 800) and the modes derived from it (ie up to EI 3200). It can be used at up to 60p in most resolutions or up to 30p in open gate mode.

We’re told it may operate differently from the combined dual gain mode the a7R IV offers in video, though. We were briefied that the image is analysed and the high gain (low noise) data is only utilized in the shadow regions of the image, making the process faster than combining both gain settings for all pixels. Engaging the Dual Gain mode (via the ISO menu) increases the readout time by a factor of 2.1x, which is very similar to the proportion of increase we measured on the a7R VI.

Three “base” ISO settings

Interestingly, Sony also says the FX5 has three “base ISO” settings: 800, 4000, 12,800. To make sense of this, it’s worth noting that there isn’t a fixed or universally shared definition of what ‘base ISO’ means. What it doesn’t directly refer to is conversion gain steps at the sensor level. So, for instance, the FX3 and a7S III had dual conversion gain sensors, but Sony says it does not consider them to be cameras with dual base ISO.*

James Tirado

Instead, Sony tells us its definition of base ISO relates to modes that offer the same dynamic range distribution between highlights and shadows, and have a near-identical noise floor, allowing footage to be intercut between the modes. This makes most sense when working in the camera’s Cinema EI mode, where the camera is locked to one of these “base” states and then delivers ISO settings up to two stops higher or lower by essentially under- or over-exposing the ‘base’ state, then including a metadata tag saying how light or dark the footage is meant to be rendered. This really comes into its own in a Raw workflow, as this is how it’s possible to adjust the “ISO” of footage, after the fact.

The decision of Sony to offer three “base ISO” states shouldn’t lead you to conclude that there are three distinct gain steps at the hardware level, nor should it be confused with the camera’s optional “Dual Gain” mode that combines the output of different hardware states.

*Just to make clear how slippery the concept is, the FX3’s firmware V2 added Cinema EI, including a setting called Base ISO, which has two settings. We are told the higher of these is officially considered a High Sensitivity mode, not a second base ISO.

New UI, wider range of features

Beyond these, the most radical change is to the user interface, with the FX5 gaining an all-in-one settings display borrowed almost directly from the Burano (and closely mimicking the displays that Panasonic borrowed from Arri, etc, etc). Its menus have also been re-worked to make them look more like Sony’s pro cinema models, which will add a bit of a learning curve for existing FX users but brings it closer into line with other production cameras.

The company says it will be adding a vertical version of the UI in firmware 2.0.

James Tirado

Also added are a host of tools that other brands have started offering but that have been absent from previous Sonys at this point in the market. So, in addition to options like the focus map, that highlights blocks of the image that are in and out of focus, the FX5 offers a false color display and waveforms for helping to judge exposure, and a vectorscope display for assessing color distribution. These come on top of tools such as zebras, focus peaking and a histogram, that were already available.

James Tirado

The camera is based around Sony’s latest Bionz XR2 processor, so gains all the subject recognition AF modes that we’ve become used to on the stills side of things, boosting autofocus dependability for run-and-gun shooting.

Body and handling

James Tirado

At first glance, the FX5 looks a lot like the FX3, but the changes reveal themselves, the closer you look. It’s a fraction larger, for a start, having grown a couple of mm in each direction but significantly the body of the camera itself is deeper, within those boundaries, so it feels bulkier. It’s also a fraction heavier, though Sony says it’s a less than 5% increase.

The layout of the camera’s six programmable buttons has been reworked and relabeled to better match what you’d find on the company’s higher-end cinema cameras. It also gains the multi-function dial from the Sony Burano, which can be used to navigate through menus, and make quick changes from the live view screen.

James Tirado

The FX5, like the recent Alpha cameras, gains a second USB-C socket. This can be used for a range of things, from tethering, powering the camera, data transfer or for accepting a timecode signal. The camera’s connectivity is further updated with an upgrade to Wi-Fi 6E, and the addition of an Ethernet port, which will likely find use in many houses of worship.

Display

Sony has upgraded the rear tilting/articulating display to a 3.5″ model with a video-friendly 16:9 aspect ratio. Sony says the latter change makes it a much bigger upgrade to the 3″ display on the FX3 than it appears at first glance, as that screen’s 4:3 aspect ratio meant you were looking at a video that was really only 2.5″. Now, it can fill the entire screen, provided you’re not using an open gate or DCI (“17:9”) recording mode.

James Tirado

The FX5 has two slots, each of which take either CFexpress Type A cards or the slower UHS-II SD cards. The two card types don’t connect to the same connectors: one socket it essentially sited within the other.

Battery

James Tirado

The FX5 becomes the second camera to adopt Sony’s new 20.9 Wh NP-SA100 battery, following the a7R VI. This not only provides higher voltage and capacity than the NP-FZ100 batteries the FX3 used, but should allow for slightly longer record times. Sony says it can shoot for 130 minutes at 4K/60, while the FX3 caped out at 113. Of course, this change means that those with a large collection of batteries will need to spend quite a bit to rebuild it (provided they were running off an internal unit, rather than powering their cameras via an external V or Gold mount battery).

Despite the increased battery capacity, and smaller tweaks to the body like the addition of a second 1/4-20″ socket on the bottom plate to reduce the risk of rotating, Sony says the new camera is less than 5% heavier than the FX3, coming in at 750g (26.5oz), versus 715g (25.2oz)

Accessories

While the camera doesn’t have an integrated EVF – likely a concession to keeping its body as protrusion-free, and therefore gimbal-friendly as possible – Sony is making a removable one as an optional accessory. It features a 3.68M-dot panel that can reach up to 2500 nits peak brightness, and supports a wide color gamut to provide a more accurate preview. It’ll plug into the multi-interface shoe, though Sony says it’s working with a third-party to create an extension cable for it that will let you place it in more ergonomic position.

Another accessory is the XLR handle which, like the ones released for Sony Alpha-series cameras, will enable both the use of professional microphones as well as 32-bit float audio recording. The latter feature will an exciting addition for documentary and event shooters, as its different method for storing data essentially eliminates the risk of clipping, no matter what your gain levels are set to (though your microphone can still be overwhelmed).

Video modes

Like most of Sony’s previous cameras, the FX5 delivers all its compressed footage in output-ready 4K resolutions: with in the 16:9 UHD or ~17:9 DCI formats. However, in a detail borrowed from cameras like the Venice and Burano they are named in terms of the pixel region used to capture them. So, although the camera has “Imager Mode” options called 5K 16:9, the output is still the standard 3840 x 2160 UHD footage.

James Tirado

The Raw footage, by contrast, arrives in your editor in the resolution in which it was captured. So 5K means 5K.

One of these Raw modes is a 3:2 open gate mode, capturing the full area of the sensor to make it easier to output both landscape and vertical cuts from the same clip (if you can find a composition that’s sensible for both, that is). The camera can also apply a real-time desqueeze correction for anyone using anamorphic lenses, with 1.3x, 1.5x, 1.6x, 1.8x and 2.0x squeeze factors being supported.

Raw recording

When recording to its internal Raw X-OCN codec, the FX5 can shoot at roughly 5K in 3:2, ∼17:9 and 16:9, at up to 60p. There are three levels of compression for the codec, with the standard being “LT,” and C1 and C2 adding increasing levels of compression to reduce file sizes. Sony says C1 will be around 25% smaller than LT.

The company says it plans to release a firmware update sometime in 2027 that will allow for recording 4K/240 footage in Raw, though it hasn’t provided any details on whether the mode will have a crop.

The camera needs to reboot in order to switch into or out of Raw mode. As we’ve seen on other cameras, it also needs to reboot to switch between 24p, PAL and NTSC modes, as the system clock needs to reset to work in multiples of 24, 25 and 29.97 frames per second. Because there’s no separation of Raw/Compressed or 24p/PAL/NTSC, it’s very easy to accidentally prompt the camera to reboot if you select the wrong shooting mode.

Likewise, the camera will only playback footage if it’s in the right system clock mode, and will only show you the Raw clips if you’re in Raw mode and only your compressed clips when in compressed mode.

Compressed footage modes

The FX5 names its video modes by the areas that are sampled, rather than their output resolution. The camera’s “17:9” modes (5K and 4.5K) are output as DCI 4K (4096 x 2160), while the 16:9 modes (5K, 4.5K and 3.2K) are output as 3840 x 2160 UHD.

The DCI modes can only be shot in XAVC S-I (All-I H.264), whereas moving to 16:9 adds the option to shoot XAVC H (H.265) or XAVC S (H.264) with a choice of 4:2:2 or 4:2:0 chroma sub-sampling.

Sony says the FX5 will gain support for shooting 3:2 open gate in XAVC S-I will come as part of firmware 2.0, due in around October 2027.

Super35

The FX5 also provides an option of cropping in to an APS-C-sized region of the sensor, providing compatibility with lenses designed for Super35 cameras. While the FX3’s APS-C mode caps out at 1080p, the FX5’s higher-resolution sensor provides a slightly more ambitious 3.2K (3264 x 1836) in 16:9.

Support tools

The FX5 gains a whole host of video-specific tools meant to make it easier to get proper exposure and focus. It has a waveform monitor for clearer and more accurate exposure monitoring, a false color overlay that makes it easy to see at a glance whether your subject is properly exposed and whether any of your highlights and shadows are clipping, a vector scope for more information about your colors and a focus map overlay to assist with focus.

The company has also added more options for desqueezing the preview when shooting with anamorphic lenses, providing several options between a 1.3 and 2.0x ratio.

Initial impressions

James Tirado

The FX5 is an evolution of the FX3 concept that tries to accommodate a wider range of users, and we doubt any one user will want or need the full range of its capabilities. Where the FX3 was essentially an a7S III in a more video-friendly format (or, perhaps, the camera the a7S III should have been, in the first place), the FX5 is a much more capable machine that tries to address multiple different workflows.

Small scale cinematographers can adopt its Raw workflow, while others might choose to shoot open gate and some users will output H.265 UHD files in S-Cinetone. Some people will build it into a rig, others will mount it on a gimble, while others will leave it on ‘sticks.’ The fact that the XLR handle and EVF module are optional suggests that these are option that some people will find essential while others would resent the bulk and cost of something they don’t want. Then there’s the Ethernet port, which allows the camera to be mounted and operated remotely, for applications such as churches, we’re told.

In doing so, though, Sony has made the camera a fraction larger, but probably not to the point that it would alienate many of the run-and-gun shooters who came to love the FX3.

However, the major changes to the user interface, including its frequent decision to reboot, if you accidentally select the wrong frame rate, while changing settings, are likely to make the camera seem surprisingly daunting to existing FX3 users.

James Tirado

Sony talked about adding features and capabilities that have been requested by users, but it also feels like the FX5 is much more a product of the cinema department, like the FX6, rather than having evolved from an Alpha model, as the FX3 appeared to. A lot of the features (not least Raw) might have trickled down from the Burano, but an awful lot of the interface and operational logic has done, too, which is likely to be something of a shock to anyone primarily familiar with the FX3 or 2.

James Tirado

It its favor, it’s stayed in the relatively compact body that has made the FX3 a success, but this means there isn’t room for the variable ND filter system that slides in filters from below the sensor on the bigger camera, that a lot of users were hoping for. Additional options like a USB timecode sync cable aren’t necessarily going to excite a lot of independent FX3 users, but they broaden the camera’s appeal.

It’ll be interesting to see whether Sony decides that the FX5 (or, rather, the existence of both the FX5 and FX2) means that it doesn’t need to create a direct replacement for the FX3.

Want to stay up to date on the latest product news and releases? Add DPReview as a preferred source to ensure our independent journalism makes it to the top of your Google search results.